Latest Lost Cause Project: 1979 Z28

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Midnightmoon

Full Access Member
Joined
Oct 11, 2020
Posts
1,159
Reaction score
3,409
Location
Pennsylvania
First Name
Justin
Truck Year
1979
Truck Model
C10
Engine Size
305
I didn't realize y'all sold glass too. I need to remember to get some damn catalogs, lol.

@Midnightmoon what do you mean by "wasn't fully installed"?
Fuse box was mounted and only a few runs made. Previous owner died during restoration. So, we had to finish making the runs and connections about 90% finished now.
 

Midnightmoon

Full Access Member
Joined
Oct 11, 2020
Posts
1,159
Reaction score
3,409
Location
Pennsylvania
First Name
Justin
Truck Year
1979
Truck Model
C10
Engine Size
305
Finally got around to getting a picture of the cowl tag. If my decoading skills are correct, legit Z28 built the first week of May 1979. Black exterior and Red deluxe cloth buckets.

You must be registered for see images attach
You must be registered for see images attach
 
Last edited:

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
6,978
Reaction score
12,011
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Yes. But doesn't seem to be in the oil.
They don't always swap with the oil,you can have a coolant passage only open to the combustion chamber. They also don't always fail a hydrocarbon test. Actually I wouldn't even waste time on a combustion gas test on this one. Take the plugs out and look at them,disable the ignition,pressurize the cooling system,crank the engine over at least one cylinder is going to spray water when you crank it,pull the heads pay extra attention to that cylinder looking for bad spots in the head gasket,cracks in the cylinder walls,cracks in the head.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
6,978
Reaction score
12,011
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Also if you don't have a coolant system pressure tester and don't want one for the future. I have a couple of work around. Most simple is cut a bicycle innertube,use the cut tube to replace the upper radiator hose. Inflate it with a bicycle pump.
 

Midnightmoon

Full Access Member
Joined
Oct 11, 2020
Posts
1,159
Reaction score
3,409
Location
Pennsylvania
First Name
Justin
Truck Year
1979
Truck Model
C10
Engine Size
305
Finished up the shifter install today and replaced a damaged transmission mount. Car now moves under it's own power and shifts through the gears.

Fun begins tomorrow. Pulling the top off the engine to see what we are working with.
You must be registered for see images attach



You must be registered for see images attach
You must be registered for see images attach
 

Latest posts

Forum statistics

Threads
45,963
Posts
997,175
Members
39,171
Latest member
sirex
Top