High back blazer buckets in a C10

[BBCfan]

After years of life happening my baby is now on the front burner and will remain there. Many years ago I bought a pair of Blazer buckets seats and mounted them to 1/4" aluminum plate then onto the stock bench seat slider brackets. Needed a wood block so they wouldn't rock left to right. Are separate, aftermarket mounts available to use these or is my plate mounting in need of improving?

 

[TotalyHucked]

SloshTubz makes a killer bracket that I used for mounting up some buckets in my '85. He sells just the bracket and also has universal sliders as well

You must be registered for see images attach

 

[ByrdDog]

I put buckets & a center console out of a suburban in my K30. Had to drill a couple additional holes in the floor & welded on nuts from the underside. Only kind of difficult part was making custom brackets to connect the front inner seat mounts to the floor. I guess the floor pan is different for trucks & burbs; don't know for sure about the blazer, but would guess it is the same way.

 

[bucket]

I put buckets & a center console out of a suburban in my K30. Had to drill a couple additional holes in the floor & welded on nuts from the underside. Only kind of difficult part was making custom brackets to connect the front inner seat mounts to the floor. I guess the floor pan is different for trucks & burbs; don't know for sure about the blazer, but would guess it is the same way.

Bucket seat trucks and Suburbans had stand-offs welded to the floor for the inner seat track mounting.

Blazer floors are flat and use completely different tracks.

 

[scape]

SloshTubz makes a killer bracket that I used for mounting up some buckets in my '85. He sells just the bracket and also has universal sliders as well

You must be registered for see images attach

What are your seats out of?

 

[TotalyHucked]

What are your seats out of?

They're out of an '04/05 Subaru WRX (supposedly an STI), stumbled upon them on marketplace. For $200 and they were already blue, it was a no-brainer

You must be registered for see images attach

 

[75BEASTK20]

Was going to put buckets and console in my build, but then no room for the DOG !! LOL
The dog is "part of the interior".