Did I Damage 94--5.7 engine???

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Durfman77

Member
Joined
Jan 12, 2020
Posts
41
Reaction score
17
Location
Michigan
First Name
Charles
Truck Year
1994 /2001
Truck Model
GMC
Engine Size
5.7/5.3
Well I put new radiator and new engine oil lines in and been ok for couple days BUT on a 60 mile trip I just pulled into a small town with one stop sign and just started to pull away and looked down to see hardly any [oil pressure]?

I shut off engine and costed to a parking lot where I seen ALOT oil dripping?------I took off oil line and the o-ring broke in-two-----I only went maybe 1/8 of mile from stop sign so walked back to see drops of oil all the way and a puddle at stop sign and drops going down road from stop sign,

So got and put gal of oil back in with another o-ring and engine seems to be running ok??

SO if it was still spitting oil out even hardly no pressure on gauge do you think I damage engine??
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,125
Reaction score
24,028
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
If it was still leaking, then the pump still had at least a little bit of oil to keep circulating. It's probably fine.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
4,092
Reaction score
5,951
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
If it's not knocking and has the same oil pressure you're good. The tell is if the oil pressure is lower.The rod bearings are last oiled, so first starved.If you wipe bearing material from no oil,then bearing clearance is increased and oil pressure drops,and or you get rod knock.
 
Last edited:

Durfman77

Member
Joined
Jan 12, 2020
Posts
41
Reaction score
17
Location
Michigan
First Name
Charles
Truck Year
1994 /2001
Truck Model
GMC
Engine Size
5.7/5.3
If it's not knocking and has the same oil pressure you're good. The tell is if the oil pressure is lower.The rod bearings are last oiled, so first starved.If you wipe bearing material from no oil clearance is increased and oil pressure drops,and or you get rod knock.
Well I have no knocking and oil pressure I cant say cause I run 5w-40 full synthetic schaffers in it and now all I could get was regulars 5w-30 so oil pressure is a tad lower now but I should change oil to what I use and cut open filter?
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,125
Reaction score
24,028
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Imho, if you had Shaffers in it before, then your chances of it not being hurt are even greater. That stuff really clings from what I've seen.
 

Durfman77

Member
Joined
Jan 12, 2020
Posts
41
Reaction score
17
Location
Michigan
First Name
Charles
Truck Year
1994 /2001
Truck Model
GMC
Engine Size
5.7/5.3
Imho, if you had Shaffers in it before, then your chances of it not being hurt are even greater. That stuff really clings from what I've seen.
I dont understand why Shaffers would be bad for engine??
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,572
Reaction score
14,117
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
No problem ....Sunday morning=less brain engagement
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,572
Reaction score
14,117
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
@78C10BigTen Yeah Ted, I don't have to worry bout that anymore!!!!.....also Kooper's s10 is painted, gotta get it back together now, will have pics SOON!!!!
 

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
2,885
Reaction score
5,144
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
I use Shaeffer Supreme 7000 full synthetic 10W30. Good stuff.
 

Forum statistics

Threads
42,168
Posts
910,554
Members
33,663
Latest member
eatfood
Top