1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Clutch fork not moving much

Discussion in 'Manual Transmission & Clutch' started by Patrick Reeve, Mar 7, 2019.

  1. Patrick Reeve

    Patrick Reeve Junior Member

    Posts:
    8
    Likes Received:
    1
    Joined:
    Mar 7, 2019
    Location:
    Granite,ok
    First Name:
    Patrick
    Truck Year:
    86
    Truck Model:
    K10
    Engine Size:
    305
    Bought a 86 k10 that had set for about ten years . I’ve got it running again but the clutch just goes to the floor. So I’ve got a new master and slave because both are leaking but tried moving the clutch fork and it was stuck . Took a hammer and just tapped it to free it up (probably shouldn’t have) it’s has some movement now but it only moves towards the front of the truck and not towards the rear .

    Seems like the slave can’t fully extend to disengage the clutch .
     

Share This Page