Search results

  1. Linville33

    Sm465 question

    What years SM465 can I swap right into my truck? 83 K20 small block 400 unknown year. I would need the clutch pedal assembly and linkage/master cylinder. There are two on CL right now one says Hydraulic bellhousing for 88-98 IFS trucks (Didn't they switch to driver side drop in 88?) and the...
  2. Linville33

    Dana 44 question

    Ok guys found what appears to be a really good deal. Guy is selling a set of 3/4 ton axles for 500 bucks. Says they are rare factory axles because of the 4.56 gearing in them. Now I know the 14 Bff is the best and that's what the rear is. My question is the "Big Hub flat top knuckle Dana 44" any...
  3. Linville33

    Speedo replacement.

    Well since I broke mine trying to replace the lights behind it, I got a replacement. My question is do I have to pull the whole cluster or is there a way I can get the speedo assembly swapped without pulling it all out? Sent from my SCH-R530U using Tapatalk
  4. Linville33

    Quadrajet Rebuild

    I recently bought an 83 Scotsdale and need to get it running again. Was gonna pull motor but need to get it up and running. It has a small block 400, quadrajet in it. Don't know anything about carbs. I need to know what rebuild kit I need to get to rebuild this carb. Sent from my SCH-R530U...
  5. Linville33

    Speedo help

    Pulled the gauges out to replace the lights as half of them were burnt. Went to pull Speedo face so I can replace the brights indicator and the bulb behind it. Broke the needle in half and the stud it sits on. Any ideas? Super glue?
  6. Linville33

    6.2 Hood ornament

    Got a hood with the 6.2 ornament on it. Don't want the ornament but want the hood. Give me offers. Will have pics tomorrow.
  7. Linville33

    Sm465/np205

    Looking to pickup a sm465 4x4 and a 205 transfer case. Located in eastern iowa.
  8. Linville33

    Small block 400

    Just picked up a 83 scotsdale. Has a small block 400 in it. Sounds like a rocker knock. Was wondering what's a good build without breaking the bank
  9. Linville33

    87 v10

    Hey guys I'm sorry to say but I'm temporarily getting out of the square body game while I goto college. I have my 87 V10 with a 350 in it. Single cab long box. If anyone would like it I'm asking 2200 for it without all the spare door parts 2400 with all that.
  10. Linville33

    4l80e manual

    Just found this video figured I would share it. http://youtu.be/ozbWf_QsPrw Sent from my SCH-R530U using Tapatalk
  11. Linville33

    97 RAM question

    I know this isn't related to this forum but I'm going to school to be a mechanic and I know quite a bit about vehicles but not nothing to be in my own shop. My buddy just called me and says his truck isn't going above 3k revs. Any ideas what I should look for? Sent from my XT901 using Tapatalk
  12. Linville33

    Floor replacement questions.

    Don't know if this should go here or transmissions so I'll stick it here. 87 V10 Custom deluxe. The drivers side is rotted all to hell rocker is shot floor pan has a solid square foot hole in it. I'm replacing the floor board so my question is stock replacement or fab my own out of diamond...
  13. Linville33

    10 bolt to Dana 44

    Quick question for everyone if I swap out my 10 bolt for a 44 do I have to change any steering components or spindles? I just did ball joint on my 87 V10 and found a 44 and a 14ff for 250 and don't want to have to redo ball joints again. Sent from my XT901 using Tapatalk
  14. Linville33

    Steering arm removal

    I have searched this forum and Google. I'm doing the ball joints on my 87 V10 got the passenger side done and noe I'm stuck on this dreaded steering arm. Any help? I have been trying everything pb blaster bfh and a chisel but I can't get it freed up. It looks like its never came off before. Any...
  15. Linville33

    Aftermarket gauge question

    Quick question for everyone, if I buy a mechanical oil pressure gauge how could I put it in the stock position? Don't want to ruin the printed cluster. Sent from my XT901 using Tapatalk
  16. Linville33

    Rain gutters

    Selling the rain gutters off my truck. Have all mounting hardware and as far as I know they are original. New for 30 apiece on LMC. 40 obo for both and mounting screws. Sent from my XT901 using Tapatalk
  17. Linville33

    SOLD Rollbars for sale

    Hey everyone I'm selling the rollbars that came with my truck. Don't know much about them. Seem to fit a long bed but would be better on a short. Two tabs to Mount lights or fab your own bar up. 200 obo. Mount Carroll Illinois. Buyer pays shipping. Sent from my XT901 using Tapatalk
  18. Linville33

    Diagnostic port problem

    Hey everyone, Truck is a 87 V10 TBI 350 Diagnostic port as no power. Anybody have this problem? Possible causes? As far as I know it never had power. Truck was throwing a code and went to have it tested and the truck wasn't even detected. Sent from my XT901 using Tapatalk
  19. Linville33

    Engine weight specs

    Once again I'm am asking this great forum for more information. I'm looking at a used engine stand. The guy wants 30 bucks for it. 750lb weight capacity what does a factory 350 weigh? 87 TBI Sent from my XT901 using Tapatalk
  20. Linville33

    Cam setups

    My 87 V10 will be my first engine rebuild from pan up. I want to put a better cam in it for better performance. It will be a daily driven truck and off road mud rig. I was thumbing through the summit racing catalog today and I'm don't know what would be the better cam range. I have no idea where...
  21. Linville33

    Transmission oil change questions

    My 87 V10 with the 700r4 is my first vehicle with an automatic. I wanna change the fluid in it because it needs to be done. The fluid is not black but it isn't bright red anymore. I am very mechanically inclined(worked on many vehicles and usually the first person people call. You know how that...
  22. Linville33

    Door seals

    I took the original chrome rain gutters off of my cab. I didn't like how they stuck out so far and they leak a little now which I understand why. Anybody ever seal up the door other then the factory rubber? What did you use? Thanks in advance Sent from my XT901 using Tapatalk
  23. Linville33

    Oil pressure fluctuating

    So I bought my 87 V10 SBC 350 in July the oil pressure has always sat around 30 idle to WOT. About 2 weeks ago I start my truck up and it reads 0. It was -20 out and I had to get home from work (didn't have money for a tow) so I risked it. It sounded fine no weird noises or anything. Halfway...
  24. Linville33

    Brakes on differentials?

    OK so I have been into lifted trucks for awhile but never have I owned one. This question maybe stupid but why do they put disk brakes on the diffs? Like this. (This truck is not mine) Sent from my XT901 using Tapatalk
  25. Linville33

    Pinned doors?

    OK so I replaced my factory doors to some used ones in way better shape. Now I have a extra pair laying around. They have dents and scrapes and the drivers side has a broken vent. So I was thinking instead of selling them, I would cut right along the window scraper and fabricate a hinge system...

Latest posts

Forum statistics

Threads
42,237
Posts
911,935
Members
33,739
Latest member
michaelmarine53
Top