Search results

  1. V

    1987 208 swap for a 1980 205 will this bolt right in?

    Ah yes ok i see it now. Thanks im going to see if i can find out what the 1980 205 has. I will let you know.
  2. V

    1987 208 swap for a 1980 205 will this bolt right in?

    So If I'm reading this right I need the same size input shaft on the 205 as what is on my 208?? What about the cross member and the 208 adapter ? will the 205 bolt into the 208 adapter ?? and I will defienetlly have to change the drive shafts, correct?
  3. V

    1987 208 swap for a 1980 205 will this bolt right in?

    Ok yeah. My tranny is a 1987 TH400 with a 208 t-case. It was just removed from my 3/4 ton 4x4 that had a 6.2. I will be installing a 454 along with the TH400 and was thinking about replacing the 208 with this 1980 205 t-case. I'm prety sure I should be able to get the adapter plate that bolts to...
  4. V

    1987 208 swap for a 1980 205 will this bolt right in?

    I have the chance to pick up a 1980 205 t-case for $250 what all will i need to make this swap? My engine and tranny is out of truck so i' like to put in a 205 if its a smooth install. What all do i need to make this happen? Will my drive shafts work? I' m reading something about a change in...
  5. V

    Swap out my 6.2 Diesel for a 454

    6.2 is out:mfr_omg: that was a pain in the ass!!!!! Ok so what do I do with all these extra freaking wires???? What wires go to my new HEI dist ? Also I was planning on reusing the pw steering pump but I F!*k!d up and left the pw steering resivor on the 6.2 and it's long gone !! Can I...
  6. V

    Truck is leaning to one side ???

    My truck was never driving in the winter, it is rust free. So I "should be ok". Yes mine still has the sway bar. Why would you want to remove it? It's not needed ??? What would the benefit be of removing it be?
  7. V

    Truck is leaning to one side ???

    The front springs are brand new. I just installed them two days ago along with 4 new shocks. The rear's are a set of stock 8 leafs. I would hate to go through all the work to swap the rears and have the lean go to the other side. That would suck!!! The truck use to pull a 5th wheel trailer at...
  8. V

    Truck is leaning to one side ???

    My truck had a 4" Superlift that had a real bad driverside sagg, 1.75" up front and a 1" sagg in the rear. I just removed the Superlift and went to a stock 4 leaf HD spring set up in the front and removed the rear blocks and replaced all 8 ubolts and all 4 shocks. The truck still has the dang...
  9. V

    Need a Stock steering arm.

    YES!!!!!! I finaly found one. I had to drive 30min to get it ,but I got it... Thanks for everyones help....
  10. V

    Need a Stock steering arm.

    I'm still needing a steering arm. Anyone find there stock one yet?
  11. V

    Swap out my 6.2 Diesel for a 454

    Yeah I'm not wanting to buy another diesel, mine runs just fine. I just don't care for the smell, sound or performance of the engine. Going from a 06 LBZ to a 6.2J is not impressive at all. I only bought this truck because it is so clean. There is nothing I could do to this 6.2 to even come...
  12. V

    Swap out my 6.2 Diesel for a 454

    Thanks, and don't worry about offending me really it wouldn't. I'd really just like to know what is not out of line. Next weekend I'm going to a swap meet and I'm thinking of addvertising my 6.2 with it still in my truck so people can see and hear it run. But I really don't have any idea what...
  13. V

    6.2 and a 454 weight ??

    How is a 6.2 Diesel weigh more than a 7.4 BBC ??? They are both made out of cast arn't they ????
  14. V

    Need a Stock steering arm.

    Ok cool thanks!!!!
  15. V

    Swap out my 6.2 Diesel for a 454

    Yes It is the 6.2J. My plans are to round up all the parts I need to do the swap,. Alond with getting my 454 rebuilt then do the swap over a weekend. But with my luck I'm sure I will run into some snags and it will take me a week or two. My engine is at the machine shop. They just called me...
  16. V

    Any lifted snow plow trucks ????

    Ok so are you saying your 20 K2500 has the stock front springs with just add a leaf , and 33" and it's to high for your plow?
  17. V

    Need a Stock steering arm.

    OH ok yeah mine is for sure for the 4" lift.
  18. V

    Need a Stock steering arm.

    Ok cool !!!! Do you have a picture of a stock one?? I'd like to see what one looks like just to make sure I don't already have one on my truck. I don't think I do but I'd like to see just for the heck of it.............
  19. V

    Any lifted snow plow trucks ????

    That's what was thinking.. If I remember correct, I think the mount needs to be like 15 or 16" from the ground for the best postion. I think I will probably remove the 4" superlift and go with what ever springs will alow 285/75-16 I think a 1" or 2" will alow that with 700 + LBS hanging...
  20. V

    Need a Stock steering arm.

    NO it's U-shaped with 3 holes in it and it bolts on to the driver side it looks like this http://www.ebay.com/itm/Pitman-Arm-73-87-Chevy-GMC-Steering-Arm-4-6-Lift-/360453211542?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AChevrolet&hash=item53ecaf8596&vxp=mtr I need a stock one I...
  21. V

    Need a Stock steering arm.

    I'm looking for a stock steering arm for my 87 3/4 ton 4X4. I'm thinking I will remove the 4" Superlift and go to HD front springs that will be able to handle my BB and snow plow. I can't seem to find anyone that sells them. Anyone have one laying around to sale me real cheap???
  22. V

    Any lifted snow plow trucks ????

    I'm planning on installing a 7.5 BOSS snow plow on my truck. As of right now It has a 4" Superlift part #01-234-06 My truck is a 6.2 soon to be a 454. The truck sags pretty bad on the driver side about 1.75" So I called Superlift today and told them my deal. The guy named Mike told me my...
  23. V

    So this is a 6.2l diesel?

    Yeah that looks like a 6.5, It does'nt look anything like my 6.2
  24. V

    New to this site

    Yes I just picked up a 454 out of a auto salvage yard last week. They said it was a 1974 and it came out of a truck. But after running the casting numbers 3963512 with a date code of H 25 70. The heads are 1974 781"s so my guess the 70 454 was put into a 1974 truck and someone put on the 781's...
  25. V

    New to this site

    The lift is a 4" Superlift, the wheels are 16" x 8", and tires are 315/75/16 Yes the 6.2 is going BYE, BYE !!!!! It smokes really BAD on cold starts, and stinks pretty bad. The truck has never been driving in the winter, so really I don't trust it to be very reliable for me in the Iowa...

Latest posts

Forum statistics

Threads
42,138
Posts
909,979
Members
33,638
Latest member
bigboytko
Top