Search results

  1. M

    Exhaust gas recirculation (egr) system 1989 tbi

    Mine would buck and sometimes stall when creaping along off road partial throttle.disconnexted the vac line and plugged it no issues since. That was 4 years ago.... Sent from my SM-G970U using Tapatalk
  2. M

    Clutch master cylinder volume

    Hmmm i know people using the 85 era master with the late model nv4500 slave with no issues so it should not be the master to slave ratio. But i dont know what else might be wrong. Sent from my SM-G970U using Tapatalk
  3. M

    NV4500 Swap - Clutch/Hydraulics Dilemma

    Id try the line for a late model chev 2500 pickup. Maybe something like this Try searching the clutch line for a 1997 silverado k2500 just a guess but that looks like your master and the other end should fit the quick connector on a late model slave cylinder...
  4. M

    NV4500 Swap - Clutch/Hydraulics Dilemma

    That i dont know usually square body suburbans used this style. Yours looks like the later style maybe? Sent from my SM-G970U using Tapatalk
  5. M

    NV4500 Swap - Clutch/Hydraulics Dilemma

    The fitting threaded on both ends goes into the line hole on the master then attaches to the hose listed then the other fitting goes on the other end of the hose and will attach to the quick disconnext on the internal slave cylinder. Sent from my SM-G970U using Tapatalk
  6. M

    NV4500 Swap - Clutch/Hydraulics Dilemma

    Nothing against the AA kit. But im in the process now of swapping a late model nv4500 in place of my 700r4 (more work than your swap) you can run you current master cylinder and the late model slave cylinder by using this hose. https://www.summitracing.com/parts/ear-64191936erl and these 2...
  7. M

    truck for sale

    Good on you oldretiredafguy! RaiderL hope all goes well with your health ill throw a prayer up for ya. Sent from my SM-G970U using Tapatalk
  8. M

    Selling My Sidekick

    Nice truck good luck with sale Sent from my SM-G970U using Tapatalk
  9. M

    cs 130 alt upgrade

    I see thanks for the heads up. Yea if whats been said is truc no one should buy from him and he should not be allowed to sell. Ghat being said it looks like his post is very old so hopefully he is no longer around. Sent from my SM-G970U using Tapatalk
  10. M

    cs 130 alt upgrade

    Yea why theif? Sent from my SM-G970U using Tapatalk
  11. M

    cs 130 alt upgrade

    ??? Sent from my SM-G970U using Tapatalk
  12. M

    New member intro and questions

    Here is with a pry dar on the ring gear instead of rag and my hand also my marking compound may have been a little drier than yesterday Sent from my SM-G970U using Tapatalk
  13. M

    New member intro and questions

    I ran that pattern with my hand and a rag on the ring gear but will run it again with a pry bar and more preasure and report back. Sent from my SM-G970U using Tapatalk
  14. M

    New member intro and questions

    Just did my first re gear 14bolt ff rear 7.5 thousanths back lash pinnion bearing preload 30in lbs. Please give opinions of my contact pattern. Whould you run it? Will it be strong and last? If not how would you adjust? Thanks mike Sent from my SM-G970U using Tapatalk
  15. M

    Gas pedal hard to o press

    Interesting idea i will keep in mind for possible future options Sent from my SAMSUNG-SM-G930A using Tapatalk
  16. M

    Gas pedal hard to o press

    Although tv cable looks new the majority of drag seems to be coming from the tv cable its much easire to push the pedal with it off. With cable and trans being new im not sure why this is but thought id update the post that this is what i have found Sent from my SAMSUNG-SM-G930A using Tapatalk
  17. M

    Gas pedal hard to o press

    I have a 1990 suburban 350 tbi 4x4 and the gas pedal is very hard to push. Moved easily at the throttle body even with the tv/kick down cable attached so i bought and replaced the throttle cable and was surprised to find that the cable i was replacing exits the fire wall does a short loop then...
  18. M

    r3500 new lower control arms wont take grease??

    Sometimes if you tighten the grease zerk all the way in it will contact something on the inside and plugs the zerk try backing it off a little bit and try again also take your grease gun and pull the trigger a few times with it connected to nothing if grease comes out good if no grease comes...
  19. M

    1990 suburban v1500 bumpers

    I think they are ok and functional pistols but i learned on a 1911 so the glock grip angle is not my friend. But the biggest thing that turns me off glock is the glock fan boys. Glock perfection bla bla bla i think they are fine guns but i think that there are many good guns out there. Sent...
  20. M

    1990 suburban v1500 bumpers

    Also ignore the glock sticker just noticed it and it will be removed. One of my friends pranked me and put it there i love guns but am not a glock fan so he is messing with me. Sent from my SAMSUNG-SM-G930A using Tapatalk
  21. M

    1990 suburban v1500 bumpers

    Best pictures I can take right now weather outside and lighting aren't very good I like them now but I would never recommend the company I got them from I had to hire another company to fix all of the errors and the original company was very difficult to deal with and caused me a lot of hassle...
  22. M

    1990 suburban v1500 bumpers

    They are no longer available Sent from my SAMSUNG-SM-G930A using Tapatalk
  23. M

    1990 suburban v1500 bumpers

    Now $50 for the pair few more days and ill scrap them if no intrest. Sent from my SAMSUNG-SM-G930A using Tapatalk
  24. M

    1990 suburban v1500 bumpers

    Bumpers now $50 each. Sent from my SAMSUNG-SM-G930A using Tapatalk
  25. M

    1990 suburban v1500 bumpers

    Replaced my 1990 suburban bumpers with custom 4x4 bumpers. So the originals have to go. They are in pretty good shape. Let me know if your interested. In 1 or both. Can get more or better pics later. Located in zimmerman mn. Figured id put them on here first then if no intrest craigs list. Not...

Latest posts

Forum statistics

Threads
42,125
Posts
909,623
Members
33,618
Latest member
1975K20
Top