Front differential vent hose

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
11,822
Reaction score
54,665
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
Where does the front diff vent hose go? Mine went to a prebent pipe that went to (I'm guessing) the canister? Not sure about any of it since the PO's son pulled ALL the vac lines off. No idea why it would go anywhere but to open air like the rear's.

Thx.
 

skysurfer

Full Access Member
Joined
Oct 23, 2010
Posts
2,648
Reaction score
2,023
Location
west coast
First Name
John
Truck Year
1989 Suburban
Truck Model
V2500
Engine Size
5.7/TH400/NP241C
I’m not sure if they are all routed exactly the same, but my ‘89 goes to a short section of hard line attached to the frame near the steering box, and then more rubber hose (with check valve) terminates at a bracket attached to the core support near the headlight.
 
Last edited:

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,478
Reaction score
4,605
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,70,48
Truck Model
Suburban k10, bonanza k10, c30 C&C, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350
My 84 goes from the diff to a hardline on the engine crossmember near the frame, or to the frame near the crossmember. The hardline runs inside the frame rail and comes up over the top inside of the frame rail, in front of the power steering lines, then I extended mine as far up as I could on the core support between the headlights and rad support, with the check valve guy at the end.

You must be registered for see images attach
 

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
11,822
Reaction score
54,665
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
Ok....think I found a few pics of this thing - and where it mounted. Are these OE check valves still available - or did you use something more midevil? :hat:

Wondering what kind of hose works - cant see needing the high $ emission stuff. THX!

You must be registered for see images attach
You must be registered for see images attach
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,478
Reaction score
4,605
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,70,48
Truck Model
Suburban k10, bonanza k10, c30 C&C, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350
Ok....think I found a few pics of this thing - and where it mounted. Are these OE check valves still available - or did you use something more midevil? :hat:

Wondering what kind of hose works - cant see needing the high $ emission stuff. THX!

You must be registered for see images attach
You must be registered for see images attach
In that second picture, the long hose hanging down with the band clamp and the check valve on there, i believe they are still available. I'm not sure the first picture is factory, but would work, I mounted mine higher up and to the right of the position.
 

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
11,822
Reaction score
54,665
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
Those pics are one and the same thing. Pics I tool last year while taking things apart. This is an 85.....no doubt where they hung it was the topic of meetings and redesign. lol


Maybe THESE? Rock's got them. So does Summit.
 
Last edited:

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
4,906
Reaction score
10,869
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
Location on the '86 'burb. Same on the '85 pick-up, but there's this diesel radiator in the way.

You must be registered for see images attach


And apparently so is my finger.

Anyway, it's on the stud on the rad support.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,211
Reaction score
5,121
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
I just took apart the front on my 1980 and its in the exact same spot as the pic above.
 

AKguy

Full Access Member
Joined
Feb 16, 2019
Posts
540
Reaction score
891
Location
Alaska
First Name
Randy
Truck Year
1981
Truck Model
K30 Crew Cab Silverado
Engine Size
460
I got mine from Inline Tube.
 

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
11,822
Reaction score
54,665
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
Picked up a 5pk of OE GM's on Rock. Will do both axles and then found another on the transfer case.
 

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
996
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
Why in the world would they put the hose way away from the axle like that when the one in the back is just right above the rear end up on the frame? Why would it need to go that far away to vent pressure from the axle housing?
 

Jawzjeep

Honk if parts fall off
Joined
Jun 5, 2021
Posts
442
Reaction score
823
Location
Washington
First Name
Joshua
Truck Year
1991
Truck Model
Suburban
Engine Size
350
You want it up high enough to not allow water to enter when you are doing deep puddle/river/pond crossings.

Some relocate them even higher.

Im a 4x4 guy and its automatic to go put longer hoses on them. Keep the vent on it too.
 

Latest posts

Forum statistics

Threads
42,213
Posts
911,430
Members
33,712
Latest member
87R10_Cruising
Top