best way to service power steering pump?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jwernatl

Full Access Member
Joined
Oct 5, 2020
Posts
190
Reaction score
127
Location
Senoia, GA
First Name
John
Truck Year
1987
Truck Model
V10
Engine Size
5.7ltr
Guys Need to replace the fluid in my power steering pump - is there a best way to do this? (without removal?) The fluid is old burned up smelly and yucky.
 

Swearbody

Full Access Member
Joined
Nov 4, 2018
Posts
701
Reaction score
716
Location
Birmingham AL
First Name
Jeff
Truck Year
84
Truck Model
C1500
Engine Size
355 sbc
There are a ton of options. Im assuming no one answered yet because its such a trivial task. Here is a few options
Use a turkey baster to suck it out
use a mighty vac
use some paper towels or shop rags
use a long funnel to displace the old fluid with new by placing snout of funnel at lowest position in the reservoir.
 

fast68chevy

I am the original fast68chevy
Joined
Oct 17, 2020
Posts
172
Reaction score
88
Location
LINCOLN IL
First Name
RANDY
Truck Year
1975
Truck Model
C20
Engine Size
350
just disconnect pressure hose at the box and put it in a bucket and dump in new fluid as its running turning wheels flush it it out good. run new hydraulic oil AW32 or AW46. cheap store bought ps fluid is total garbage. i just re-sealed my steering pump the other day. it was leaking out the reservoir seals badly..

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
5,882
Reaction score
9,619
Location
Washington
First Name
Todd
Truck Year
1986
Truck Model
K20
Engine Size
454
^What he said. But I disconnect the return line. Low pressure.
Run engine for a couple seconds line into a bucket, replace lost fluid. Repeat a few times until “old” fluid comes out clean.
Helps to have 2 people for this task.

On newer cars, I do a “lazy mans flush” on PS and brake fluid if it’s still decent fluid. Suck out all the fluid in reservoir with turkey baster or vac pump. Replace, run, repeat several times. Brakes I run the vehicle for weeks between replacements so the fluid “mixes”.
Not as complete as first method, but think this way. mic you get 50% first time, next time will be 75%, next 87.5, next 93 etc. it wastes good fluid but quicker cleaner easier.
Not if fluid is trashed though imo.
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,387
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
I like to siphon the reservoir, disconnect the return, jack up the front, and turn the wheels lock to lock continuously while keeping the reservoir filled until it’s spitting out clean fluid. That way the pump’s not spinning with the engine and potentially going dry.
 

fast68chevy

I am the original fast68chevy
Joined
Oct 17, 2020
Posts
172
Reaction score
88
Location
LINCOLN IL
First Name
RANDY
Truck Year
1975
Truck Model
C20
Engine Size
350
I like to siphon the reservoir, disconnect the return, jack up the front, and turn the wheels lock to lock continuously while keeping the reservoir filled until it’s spitting out clean fluid. That way the pump’s not spinning with the engine and potentially going dry.


it wont hurt it to be dry for a few seconds. i can atest to it.. i ran mine dry f rdays a t a time otally bone dry and then when i disassembled it the other day to re-seal it it was fine.,. not a peck of any metal anything at al no damage to be concerned about. there is a factory instaleld storng magnet on the backside fo the pump inside to catch anything at all and mine has not a peck or a single shaving anything after running it dry ALOT daily and very recently.
but of course anyone/everyone has their own opinions or ideas and whatever,, you can do whatever you want with what information you have here now.. if i knew for sure that it would cause bad damage to your pump then i would not recommend or suggest it. aqll youre doing here is trying to repladce your old nasty burnt up contaminated fluid in a 40 year old pump,,. we arent doing rocket science here.,. just drain the damn thing and stick new oil in it.. done.. whichever way you want to.. some ppl seem to want to make a huge ordeal about or over something minor or simple..
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
5,882
Reaction score
9,619
Location
Washington
First Name
Todd
Truck Year
1986
Truck Model
K20
Engine Size
454
I like to siphon the reservoir, disconnect the return, jack up the front, and turn the wheels lock to lock continuously while keeping the reservoir filled until it’s spitting out clean fluid. That way the pump’s not spinning with the engine and potentially going dry.
Will it spit the fluid all out slowly like this? Never tried it but that’s a great idea.
 

jake wells

Can i be me?
Joined
Jul 31, 2010
Posts
2,133
Reaction score
2,485
Location
Brownsville Kentucky
First Name
jake
Truck Year
1975
Truck Model
custom deluxe 10
Engine Size
350
i used the turkey baster on mine and replaced it with dexron vi and it works just fine.
got rid of the nasty smelly fluid and the whine on cold mornings.
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,387
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
Will it spit the fluid all out slowly like this? Never tried it but that’s a great idea.

Nah, it’s very quick. The steering is unloaded so you just work it back and forth till it’s clear.

I use universal fluid. It’s about as viscous as cooking oil, and some people here say to switch from the thick stuff to that, which I’m in that camp. I like it because it’s not viscous like Dex so I know it always flows well, particularly in the cold, so the pump doesn’t have to push what amounts to molasses. The lubricity isn’t as good as ATF, but I think in this situation the hydraulic aspect is more important than the lubricating one, and it’s best not to punish the pump. If something went awry, I’d be the first to admit I was wrong, but I have it in my Jimmy and my Cutlass and both are fine with it, the former utilizing recirculating ball steering and the latter has rack and pinion.

Whatever the merits of the different fluids, I’d cite service literature and go by that regardless.
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,387
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
i used the turkey baster on mine and replaced it with dexron vi and it works just fine.
got rid of the nasty smelly fluid and the whine on cold mornings.

And to go along with what I just said above, I think it makes sense to do this in your situation just like you’d use a higher viscosity oil in a tired engine.
 

jake wells

Can i be me?
Joined
Jul 31, 2010
Posts
2,133
Reaction score
2,485
Location
Brownsville Kentucky
First Name
jake
Truck Year
1975
Truck Model
custom deluxe 10
Engine Size
350
And to go along with what I just said above, I think it makes sense to do this in your situation just like you’d use a higher viscosity oil in a tired engine.
The only reason i used Dexron VI is because it flows much better cold than some power steering fluids and Dex/Merc III.
Besides winters are unpredictable here either it's to damn cold or not at all.
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,448
Reaction score
13,778
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
it wont hurt it to be dry for a few seconds. i can atest to it.. i ran mine dry f rdays a t a time otally bone dry and then when i disassembled it the other day to re-seal it it was fine.,. not a peck of any metal anything at al no damage to be concerned about. there is a factory instaleld storng magnet on the backside fo the pump inside to catch anything at all and mine has not a peck or a single shaving anything after running it dry ALOT daily and very recently.
but of course anyone/everyone has their own opinions or ideas and whatever,, you can do whatever you want with what information you have here now.. if i knew for sure that it would cause bad damage to your pump then i would not recommend or suggest it. aqll youre doing here is trying to repladce your old nasty burnt up contaminated fluid in a 40 year old pump,,. we arent doing rocket science here.,. just drain the damn thing and stick new oil in it.. done.. whichever way you want to.. some ppl seem to want to make a huge ordeal about or over something minor or simple..
Please don't get your panties in a *** because someone suggests something different than your method. We all have different ways of making things work.
 

Latest posts

Forum statistics

Threads
41,847
Posts
903,380
Members
33,361
Latest member
iiixtremeiii
Top