-
-
HAlso, never go to a brake repair shop that stands behind their work. You want a shop that stands in front of their work. Lol.
-
Hhack_man replied to the thread 4:10 gears for 86 k10.The only thing I miss from 3.08 gears was second gear pulled hard over a much wider range, like 15 MPH to 40 MPH. So in traffic now I...
-
Hhack_man replied to the thread 4:10 gears for 86 k10.Exactly, I used to be constantly downshifting the MT on interstate hills before regearing. The original 3.08 gears were hideous. I was...
-
Hhack_man replied to the thread 4:10 gears for 86 k10.I put 4:10 gears in my '83 K10 which has a 0.73 O/D w/ 31" tires. It plows and hauls wood like a beast but rev's a bit on the highway...
-
Hhack_man replied to the thread HIT THE IGN. KEY AND NOTHING.Everybody knows you just hit it harder to speed it up
-
Hhack_man replied to the thread How does this sort of thing happen????.Yup I caught a Honda dealer red handed doing EXACLY this. I put whiteout on the rubber bleeder caps to make sure they removed them...
-
HI believe that it is best to replace u-bolts simply because of the stresses they can see upon removal if they have been installed for a...
-
Hhack_man replied to the thread Leaf Spring Torque.Wow we are not the only ones going around on this topic. Consensus seems to be not re-using is the safe bet but that's not surprising...
-
-
Hhack_man replied to the thread Leaf Spring Torque.I installed an add a leaf lift kit on my '83 K10 truck when it was a youngster, had to replace most of the Ubolts but I'm pretty sure I...
-
Hhack_man replied to the thread Leaf Spring Torque.Honestly If somebody told me 40 years ago when I reused some Ubolts on my 83 K10 it could be a problem I would not have done it, I was a...
-
Hhack_man replied to the thread Leaf Spring Torque.Darn wish I knew that 40 years ago. I don't even remember using a torque wrench.
-
Hhack_man replied to the thread Leaf Spring Torque.Are you saying Axle U bolts are one time use once they've been installed?
-
HUpdate on Gas in Oil issue: After draining the oil (and gas in the oil) and the oil filter, I replaced the mechanical fuel pump and the...
-
Hhack_man replied to the thread Update on my Ignition Module failure!.Why is the MSD unit so much larger than an OEM HEI Ignition module? I know heat sinking is important but the size difference is huge.
-
HYes
-
-
Loading…
-
Loading…
Latest posts
-
-
-
-
Center/carrier bearing orientation - 76 C20 suburban
- Latest: HotWheelsBurban
-
