10 Bolt Tie Rod question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SubDominant

Full Access Member
Joined
Jun 7, 2020
Posts
117
Reaction score
101
Location
California
First Name
Keith
Truck Year
1989
Truck Model
V1500
Engine Size
5.7L
I don't like the looks of it. If you run it like this I would loosen the clamps and slide both out toward the ends a ways and then retighten just to get more coverage over the solid part of the tie rod.

I agree. I figured there should be threads showing in the slot like my original. I am not only concerned with thread engagement, but with strength if the rod had to flex up and down a little. I thought to push the clamps out but I have just ordered new parts from Rock Auto.
 

SubDominant

Full Access Member
Joined
Jun 7, 2020
Posts
117
Reaction score
101
Location
California
First Name
Keith
Truck Year
1989
Truck Model
V1500
Engine Size
5.7L
Thanks to all who replied, by the way! This is a great site and resource.
 

MisterB

Full Access Member
Joined
Sep 9, 2019
Posts
676
Reaction score
845
Location
Northwest
First Name
AJ
Truck Year
1980
Truck Model
GMC K2500 4X4
Engine Size
350
I agree. I figured there should be threads showing in the slot like my original. I am not only concerned with thread engagement, but with strength if the rod had to flex up and down a little. I thought to push the clamps out but I have just ordered new parts from Rock Auto.
I'm glad to hear that. I was about to recommend buying new. Last week I ordered both tie rod ends and the adjuster for less than $100 at LMC. Just not worth chancing it with this

Sent from my SM-N975U1 using Tapatalk
 
Last edited:

SubDominant

Full Access Member
Joined
Jun 7, 2020
Posts
117
Reaction score
101
Location
California
First Name
Keith
Truck Year
1989
Truck Model
V1500
Engine Size
5.7L
I'm glad to hear that. I was about to recommend buying new. Last week I ordered both tie rod ends and the adjuster for less than $100 at LMC. Just not worth changing it with this

Sent from my SM-N975U1 using Tapatalk

Yes. I feel much better about it. Plus it was a learning experience.
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,452
Reaction score
13,785
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
I feel a LOT better about your decision, it's the right way to do it!!!!!
 

SubDominant

Full Access Member
Joined
Jun 7, 2020
Posts
117
Reaction score
101
Location
California
First Name
Keith
Truck Year
1989
Truck Model
V1500
Engine Size
5.7L
Got some goodies!

You must be registered for see images attach

You must be registered for see images attach


Now this is the kind of thread engagement I was looking for!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach


Raised steering arm, drag link, and steering arm to come!
 

Latest posts

Forum statistics

Threads
41,857
Posts
903,628
Members
33,370
Latest member
mitchell1128
Top