400 SBC vs 454 BBC

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WHEELMAN

Full Access Member
Joined
Aug 9, 2011
Posts
136
Reaction score
11
Location
HICKORY TAVERN SC
First Name
BILL
Truck Year
1986
Truck Model
C10
Engine Size
454 v8
Sweet Jesus help us all.a 400 hundred block.are you crazy.through that block away.take it to the scrap metal yard.a 400 block is good for nothing.it is bored out and has simeze cylinders.

Do you even know what that means.look straight across one side to the end.no meat.in between the cylinders

For the head gaskets to seal.they blow holes.stright across.from one cylinder to the other they want take any heat.they blow.and never ever.try to use one.for a boat engine.

It's 350 small block or 454 big block use the big block.if engine bay is no problem.you are welcome
 

WHEELMAN

Full Access Member
Joined
Aug 9, 2011
Posts
136
Reaction score
11
Location
HICKORY TAVERN SC
First Name
BILL
Truck Year
1986
Truck Model
C10
Engine Size
454 v8
There is no such thing as a 400 big block.it is a bored out 350 small block.we had one in a brand new 1971 Chevy impala.it lasted the warenty.like 12,000 miles and after that.it would over heat.all the time.lock up thermostat,s.

Look at a 400 block.you will see that they are no good.for nonthing.unless you just like wrenching all the time
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I had a 400 with a Holley on top of it. I loved it...
 
Joined
Oct 13, 2018
Posts
37
Reaction score
2
Location
Grove City, Ohio
First Name
Sean
Truck Year
1977
Truck Model
K10
Engine Size
350
Sweet Jesus help us all.a 400 hundred block.are you crazy.through that block away.take it to the scrap metal yard.a 400 block is good for nothing.it is bored out and has simeze cylinders.

Do you even know what that means.look straight across one side to the end.no meat.in between the cylinders

For the head gaskets to seal.they blow holes.stright across.from one cylinder to the other they want take any heat.they blow.and never ever.try to use one.for a boat engine.

It's 350 small block or 454 big block use the big block.if engine bay is no problem.you are welcome
Yea I can see that the cylinders are siamesed along with little meat to them compared to my 454. Doesn't mean it's a bad motor just have to be careful with it. I am planning on using the 454 but the 400 will probably go in a smaller car for drag racing or street/strip.
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,745
Reaction score
935
Location
Justin, TX
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
It should. Dropped one into my 79 C10 (auto) before lunch one day using mostly HFT tools. Only needed to pull the rad to maneuver the engine in safely.
When you went from SBC to BBC, were you able to use the same engine mount frame brackets in the same location--the ones bolted to the frame? On my 250 six to 350 conversion, I was able to re-use the originals, but had to relocate them to a different set of holes to maintain the proper driveline angle and to place the radiator fan in the center of the shroud.

For anyone interested, I have many of the part numbers for frame brackets and clam shells for various years, models (K and C), and engine combos. In the GM parts books, frame brackets are called "BRACKET, ENG MT FRM". The clam shells are called "BRACKET, ENG MT".
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,745
Reaction score
935
Location
Justin, TX
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
Sweet Jesus help us all.a 400 hundred block.are you crazy.through that block away.take it to the scrap metal yard.a 400 block is good for nothing.it is bored out and has simeze cylinders.
Lots of dirt track racers would disagree with you. Back in the 1980s-early 2000s, they snatched those things up like crazy at junk yards. They would make incredible TQ and close to 500 HP, and last for a few seasons (probably just as long as a higher revving 350).

I suggest Googling terms like "400 small block RPM potential" or "400 small block dirt track" to find thousands of posts from 10-20 years ago. For a street truck engine, I think 350 HP along with massive TQ (20%-25% more than any 350) can be achieved reliably with a 400. Now if the OP just has to have 400 HP at the expense of TQ, then that means more revs and more money, so a BBC would be best, IMO.

I didn't notice that the OP said his block had been bored. If you meant a 400 is a bored 350, then you didn't realize the 400 cylinder walls are much thicker. Kind of like 327 and 302 cylinder walls are thicker than 283 walls.
 

rpcraft

Full Access Member
Joined
May 31, 2016
Posts
1,329
Reaction score
507
Location
Texas
First Name
Robert
Truck Year
1985
Truck Model
Jimmy
Engine Size
LS 6.0 364 CID
I would tend to lean towards the Big block for reliability and ultimate torque/power potential. As previously mentioned, the 400 in stock trim was prone to overheating and simple issues that never made it a legendary motor. If given the alternative to a mildly built 350 and a stock 400 I'd take the 350 over it, just simply because so much more can be done to improve upon it with mild work. The same can be said about the big block.
 

DirtyDYT

Full Access Member
Joined
Jul 17, 2018
Posts
158
Reaction score
84
Location
Ohio
First Name
Chris
Truck Year
‘79
Truck Model
C10
Engine Size
454
When you went from SBC to BBC, were you able to use the same engine mount frame brackets in the same location--the ones bolted to the frame? On my 250 six to 350 conversion, I was able to re-use the originals, but had to relocate them to a different set of holes to maintain the proper driveline angle and to place the radiator fan in the center of the shroud.

I reused the frame side engine mounts without any changes. I also reused the bbc engine side clamshells up top. I wasn't sure if I could do that at the time but I asked a could of local "Chevy guys" and people on this forum. Turns out it was a super easy swap besides mistakes I made due to lack of experience (like not having a dual pattern flex plate to mate to the TH350).
 

Mad gimp

Full Access Member
Joined
Nov 9, 2018
Posts
75
Reaction score
60
Location
Paris Illinois
First Name
Wade
Truck Year
1979
Truck Model
C30
Engine Size
468
454 vs 400? Throw the 400 block out in your junk and ill come get it. I love them 400's

You must be registered for see images attach
 

Mad gimp

Full Access Member
Joined
Nov 9, 2018
Posts
75
Reaction score
60
Location
Paris Illinois
First Name
Wade
Truck Year
1979
Truck Model
C30
Engine Size
468
There is no such thing as a 400 big block.it is a bored out 350 small block.we had one in a brand new 1971 Chevy impala.it lasted the warenty.like 12,000 miles and after that.it would over heat.all the time.lock up thermostat,s.

Look at a 400 block.you will see that they are no good.for nonthing.unless you just like wrenching all the time
Other than outside dimensions there is very little similarity between a 350 and a 400. A 400 is externally ballanced and a 350 is internally ballanced. A 400 has larger main bearing journals. The bore and stroke of a 400 is nearly identicle to the bore and stroke of a 402 big block. So i disagree with a 400 hundred being nothing more than a bored out 350. Did gm have cooling issues with the first few years they built the 400? Yep. Ive built 3 400 and the last one i built is the only one i can get that will run warmer than 200° but its also bored .030 and has 11&1/2 to 1 compression and has no steam holes drilled in the heads as stock 400 cylinder heads do. It will only heat up if i let it idle for extended periods of time. The last 406 i built i couldnt get it to run past 200° even beating the crap out of it in a 83 silverado pulling a car trailer
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,745
Reaction score
935
Location
Justin, TX
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
I reused the frame side engine mounts without any changes. I also reused the bbc engine side clamshells up top. I wasn't sure if I could do that at the time but I asked a could of local "Chevy guys" and people on this forum. Turns out it was a super easy swap besides mistakes I made due to lack of experience (like not having a dual pattern flex plate to mate to the TH350).
My 250 six to 350 swap wasn't as easy. Went through two sets of clam shells before I found the right ones! Also, had to lengthen or shorten many of the electrical wires. Nice to know the SBC to BBC swap is a little easier.
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,745
Reaction score
935
Location
Justin, TX
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
454 vs 400? Throw the 400 block out in your junk and ill come get it. I love them 400's

You must be registered for see images attach

Guess you didn't get the e-mail about it being total crap. :rolleyes:

Gotta wonder how many people that bad-mouth the 400 actually had one? Or did they have one with aftermarket heads w/o steam holes drilled?

Personally I had a 400 2bbl in a used 1976 station wagon, and the odometer probably showed >70K miles when I sold it. Never had an issue with it, even in that giant family truckster full of kids and luggage.

Also had a neighbor with the 4bbl version in a mid-1970s Monte Carlo. That thing rocked. It had noticeably more power than the 350s available in the Monte Carlo that year.
 
Last edited:

Mad gimp

Full Access Member
Joined
Nov 9, 2018
Posts
75
Reaction score
60
Location
Paris Illinois
First Name
Wade
Truck Year
1979
Truck Model
C30
Engine Size
468
Guess you didn't get the e-mail about it being total crap. :rolleyes:

Gotta wonder how many people that bad-mouth the 400 actually had one? Or did they have one with aftermarket heads w/o steam holes drilled?

Personally I had a 400 2bbl in a used 1976 station wagon, and the odometer probably showed >70K miles when I sold it. Never had an issue with it, even in that giant family truckster full of kids and luggage.

Also had a neighbor with the 4bbl version in a mid-1970s Monte Carlo. That thing rocked. It had noticeably more power than the 350s available in the Monte Carlo that year.
The 400 has gotten a bad wrap. And yeah like is said the 406 i run in my monte has after market heads and i did not drill the steams holes..it will get up to 210 to 220 IF and only if i let it idle for a long time. This 406 isnt big in the horse power department but its a monster in low end/ midrange torque. I push this 406 alot harder than the last one i built. I shift it a 6200 rpm. 400 were never designed for rpm like that but this has scat forged crank 6" scat forged rods and forged weisco pistons and its all been ballanced so i aint affraid to beat on it a little well i mean pretty much when the ignition key is on lol
 

morrow07

Full Access Member
Joined
Jan 7, 2014
Posts
77
Reaction score
18
Location
San Mateo, Ca
First Name
Ryan
Truck Year
1977 - 1989
Truck Model
Cheyenne - V2500
Engine Size
406 - 350
Throw it out, that's amusing. I've had my 406 for over 16 years. I beat the snot out of it, and it's never seen over 200*. It is a rocket to about 115mph. The 4l80 will solve that issue, but I'm going to be more concerned with my brick aerodynamics!

Use what want, but don't discount the 400. You're cheating yourself.
 
Joined
Oct 13, 2018
Posts
37
Reaction score
2
Location
Grove City, Ohio
First Name
Sean
Truck Year
1977
Truck Model
K10
Engine Size
350
For the meantime I've found a complete 400 SBC carb to pan for 550, talked guy down to 450 without carb. Is everything for a 350 a direct bolt in ? Same plumbing, lines, ect. ?
 

Forum statistics

Threads
41,850
Posts
903,483
Members
33,364
Latest member
Tporter79
Top