Stalling under take off

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
316
Reaction score
294
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
Did not run out of fuel it was very very low gauge was reading 1/8
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
10,170
Reaction score
19,659
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Very,very low tbi will act up,just because it's too low,especially at stops,hills,turns or takeoffs. Is it still acting up.?
 

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
316
Reaction score
294
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
Was running great filled up drove about 25 miles hyw speed and in town stop and go, On my way home from work the second stop sign it stumbled on take off next stop stumbled again did not stall Drove into subdivision 15 MPH and it stalled twice started right back up Back on roar at 35 MPH stalled put in N and fiired back made it home ??
 

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
316
Reaction score
294
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
No Backfired Checked all vac lines OK Looked at plug wires OK Looked at spray pattern hard to see lots of fuel going in at cold start Idles perfect?
 

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
316
Reaction score
294
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
Problem Solved
Replaced the ICM, while i was in there also replaced the Rotor, When reconnecting the coil wire to the ICM first one no problem second one the Flipping tab snapped off and went flying??
Luck have it be NAPA had two in stock
Test Drive no stalling yet only time will Tell
The other thing that happened Odometer rolled over to 200,000 Miles :oops:
 

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
3,118
Reaction score
5,891
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Problem Solved
Replaced the ICM, while i was in there also replaced the Rotor, When reconnecting the coil wire to the ICM first one no problem second one the Flipping tab snapped off and went flying??
Luck have it be NAPA had two in stock
Test Drive no stalling yet only time will Tell
The other thing that happened Odometer rolled over to 200,000 Miles :oops:
Glad you got it resolved
 

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,168
Members
43,335
Latest member
Sierra_87
Top