Sm465 replacement bellhousing

[blackbird454]

Hello everyone I have a recently acquired 1977 k10 350sbc sm465/np205 transfer case. However the bellhousing is cracked and I am looking for a replacement does anyone make replacement bell housings i apologize if this is question has an obvious answer. The crack is on the bottom and while it may not be terrible it’s keeping me up at night I appreciate any input or direction you guys can offer have a great day

 

[Memaloose]

Try your local wrecking yard, that's whre I go first. Good luck.
They can be welded. Any welding shop can do it.

 

[blackbird454]

Try your local wrecking yard, that's whre I go first. Good luck.
They can be welded. Any welding shop can do it.

Mine looks like this so idk if that’s fixable or if it’s even a worry yet but once I know about something I can stop thinking about it lol

 

[nvrenuf]

I'm not sure what year that bellhousing started but it was used at least from '73 to '84, they aren't a problem part so good used replacements should be easy to find.

The only aftermarket replacements I know of are race certified units which are expensive.

 

[Chevy 88]

eBay

 

[squaredeal91]

Pardon Our Interruption...

Check this one out. There's others too.

 

[blackbird454]

Thank you all I appreciate it I found novaks website it shows they sell them as well but there 400 lol I’ll grab one from eBay I’m glad to hear they aren’t a rarity item I rebuilt the front end of this truck now I’m kinda working front to back on it one piece at a time this site has helped a lot thanks for taking the time out of your day to help a fellar out

 

[xm20k]

Ouch looks like someone ran over something substantial that hit the pan as well, might have broken the seal on the pan gasket might explain all that wetness on it and the front lower section of the bell. I would tear into that as well while I was under there.

Ebay would get you a good deal I think they used the same bell on the 3 and 4 speeds in the cars as well there are 2 versions If I remember correctly one with z bar mounting boss and one without, bolt patters are the same.

 

[blackbird454]

Ouch looks like someone ran over something substantial that hit the pan as well, might have broken the seal on the pan gasket might explain all that wetness on it and the front lower section of the bell. I would tear into that as well while I was under there.

Ebay would get you a good deal I think they used the same bell on the 3 and 4 speeds in the cars as well there are 2 versions If I remember correctly one with z bar mounting boss and one without, bolt patters are the same.

The wetness is from a substantial power steering pump leak lol I have addressed the leak just haven’t cleaned it up yet but im working through one small pain in the butt at a time lol

 

[idahovette]

Check on prices.....I have one here in Idaho, no clue on shipping, but my price will beat E-bay or anyone else.

 

[straydog371]

Sway bar bolt is missing too.

 

[blackbird454]

Sway bar bolt is missing too.

Yeah I had it apart changing leaf springs shocks the front is practical new now

 

[blackbird454]

Check on prices.....I have one here in Idaho, no clue on shipping, but my price will beat E-bay or anyone else.

I’d appreciate that I’ll check on shipping how much would you want for the bellhousing itself besides shipping

 

[idahovette]

$30 plus the ride from 83672?

 

[blackbird454]

$30 plus the ride from 83672?

I’ll take that deal for sure I just got to figure out how to calculate the shipping and what not