Power window motors

[Honky Kong jr]

Has anybody cut access holes in the doors to get the motors off with out removing the regulator? My doors aren't anything special and this isn't a show truck but I got them working a while ago and now that the cab is on the passenger side is being a dick. Driver side is coming around. I plan on doing relays and I have a good harness laying across the floor from a donor 89 K5. The found is via an eyelet right to chassis. Locks work fine if fine is sounding like a jail cell door.lol

 

[Honky Kong jr]

Ok I have the patience of a pea......that's what I've been told which I am to assume I have none lol here it is motor was out in less then 15mins. And a removable cover can be made and the lower trim covers it......once I find a set.lol

You must be registered for see images attach

You must be registered for see images attach

 

[Honky Kong jr]

I will make it work lol. It will run in 1 direction if I can't get it to work it won't be from a lack of trying.

You must be registered for see images attach

 

[Honky Kong jr]

Well I think I found it issue. The contact in the plastic part was welded fast that's why when I would force voltage at it with my power probe it would trip the breaker in the probe direct short. Oh well gotta find a motor for it now.