WarlVlachine
Full Access Member
- Joined
- Aug 26, 2018
- Posts
- 55
- Reaction score
- 14
- Location
- WI
- First Name
- Robert
- Truck Year
- 1986
- Truck Model
- K10
- Engine Size
- 355
Hello,
I've been doing most of my build just from reading on this forum. One in particular refers to the Transmission in the subject, 20 pages long. Great read, beer recommended.
My situation is that I jumped on one before understanding the differences between the 4WD and 2WD variations in the tail housing. So of course I bought a 2WD and need the 4WD. Since its next to impossible to find these in the wild, I imagine finding just the tail housing is nearly as impossible. So I wanted to ask If anyone knew of some magic to work or a resource for this issue. I appreciate everyone's time.
Later on there's trying to figure out if I have to swap out transfer cases and if I'll have clearance issues with the cab floor since its a factory auto.
1986 K10 305/700R4 -----> 350/hopefully NP A833.
I've been doing most of my build just from reading on this forum. One in particular refers to the Transmission in the subject, 20 pages long. Great read, beer recommended.
My situation is that I jumped on one before understanding the differences between the 4WD and 2WD variations in the tail housing. So of course I bought a 2WD and need the 4WD. Since its next to impossible to find these in the wild, I imagine finding just the tail housing is nearly as impossible. So I wanted to ask If anyone knew of some magic to work or a resource for this issue. I appreciate everyone's time.
Later on there's trying to figure out if I have to swap out transfer cases and if I'll have clearance issues with the cab floor since its a factory auto.
1986 K10 305/700R4 -----> 350/hopefully NP A833.