77chevy400
Member
- Joined
- Mar 8, 2015
- Posts
- 35
- Reaction score
- 0
- Location
- Eastern NC
- First Name
- Chris
- Truck Year
- 1977
- Truck Model
- c10
- Engine Size
- 6.6l (400)
I put a new fuse in just to make sure that the fuse wasnt the problem. Even though the 'old' one was fairly new.
Grabbed a 2 connector brake light switch from a 86 at work. Plugged the connector into both. Still didnt solve my problem.
I used my test light and checked all my fuses under the dash. All of them light up the test light when u press the probe aganist both sides of the tester. However my brake fuse does not. While looking at it i probbed both sides and only the lower side lit up.
Im clueless and got me a nice ticket for this today so im looking to solve this immediatly.
Fyi. I had the brake pedal depressed when i used the test light.
Do you guys think its my mfs?
I have turn signals, parking lights and liscence plate markers. So everything but the brake lights work.
Ive tried changing fuses. Looked at the bulbs, changed them sides.. Looked under the truck its never been in a accident so i dont see it being a broke line. The harness was covered with dirt.
My turn signals when u turn rither one on after uve made a turn it dosent cancel itself. The handle tip has broken before and someone put a knob on it.
I also dont see how a MFS could cause no brake lights.
Any insights?
Sent from my Reddot R50 using Tapatalk
Grabbed a 2 connector brake light switch from a 86 at work. Plugged the connector into both. Still didnt solve my problem.
I used my test light and checked all my fuses under the dash. All of them light up the test light when u press the probe aganist both sides of the tester. However my brake fuse does not. While looking at it i probbed both sides and only the lower side lit up.
Im clueless and got me a nice ticket for this today so im looking to solve this immediatly.
Fyi. I had the brake pedal depressed when i used the test light.
Do you guys think its my mfs?
I have turn signals, parking lights and liscence plate markers. So everything but the brake lights work.
Ive tried changing fuses. Looked at the bulbs, changed them sides.. Looked under the truck its never been in a accident so i dont see it being a broke line. The harness was covered with dirt.
My turn signals when u turn rither one on after uve made a turn it dosent cancel itself. The handle tip has broken before and someone put a knob on it.
I also dont see how a MFS could cause no brake lights.
Any insights?
Sent from my Reddot R50 using Tapatalk