LS swap DBW pedal geometry

[Zelph]

What pedal are you using?
Holley sales a bracket designed for squarebody dbw swaps.
The bracket as you say is not the issue you are having.
However. Holley suggest using their pedal or a C6 pedal.

Genuine GM Parts 19417903 - PEDAL ASM-ACCEL (W/ BRKT & POSN SEN)

Looking for Genuine GM Parts PEDAL ASM-ACCEL (W/ BRKT & POSN SEN)? Find that and thousands of other performance and OEM parts through Scoggin Dickey Parts Center!

sdparts.com

 

[K5 Blazer]

This is what I use in my 1973 K5 Blazer, works well and looks factory.

https://www.holley.com/products/engine_swap_parts/swap_accessories/drive_by_wire_pedal_brackets/parts/145-160

https://www.holley.com/products/engine_swap_parts/swap_accessories/drive_by_wire_pedal_brackets/parts/145-112

 

[hoagster]

Get one of these, works awesome.

Gen 3 & Holley C10 Square Body & OBS Swap Pedal (1997 - 2007) 9 Pin

APPLICATION: Direct fit bolt In C10, Squarebody and OBS (73-98) drive by wire accelerator pedal. If you are swapping a Gen 3 DBW harness in your

www.psiconversion.com

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[K5Rob]

So this is what I ended up with. Half the DBW assembly and half the existing pedal. Bolted because I didnt want to fry the sensor. Geometry took a while to get to my liking but seems to work fine