Lower control arm bolt. Where to find one?

[Surffly]

I think I might have to cut one of the bolts holding the bushings in.
Where do you think I could find a replacement?

 

[350runner]

Napa

 

[Surffly]

Yeah?
I'll give them a try.

 

[Surffly]

Don't happen to know the specs?
Don't have a napa close. And don't know of any good parts places.
Can go with a bolt to match up, but think I'm going to have to call around so it would be nice to know the specs.

 

[350runner]

Give me a few

 

[350runner]

http://m.napaonline.com/parts/PartsList.aspx?k=2805537

 

[Surffly]

The shaft is fine.
Just one nut is frozen on.

 

[350runner]

Impact or install it back to the frame mount and break it loose that way.

 

[Surffly]

I used a nut breaker and got it off.
Found a replacement too.

3/4 16

 

[350runner]

Awesome

 

[Surffly]

Going to try and kill the bushing with fire!

 

[350runner]

Sure... try and don't inhale the fumes

 

[Surffly]

That's part of huge fun no?

 

[HotRodPC]

I'd agree with you on some things like Carb or Brake Cleaner, but nawww, not that burning rubber. Been there done it accidently. Pretty rough stuff if you get a good inhale of it. It'll make your lungs hurt for a couple days.

 

[Surffly]

Map gas for the win!