Looking for a long bed

[Rollin_Thunder]

Hey all,
I'm looking for a long bed for my 86 K30 Custom Deluxe. I want to find a year and model correct for it. If anyone around me has one let me know. I want a rust free (or mostly) fleetside. Also what lets you know what tailgate went with what model? I have seen multiple different ones in the same year.

 

[J Knight]

This is the correct 81-87 tailgate.

You must be registered for see images

 

[Evil Crew Cab]

Make sure you get one off an '85 or newer as the fuel filler necks are different. OR you will have to take the filler neck assemblies off your donor pre-'85 so they will mount properly to the bed.

If you happen to be passing through Reno, I have a good condition rust free pre-'85 bed that I have been using since converting to SRW. It needs some work to make it perfect but it's a good bed. I found a brand new '86 bed that was a take-off of a truck when it was brand new so I'll be swapping that gem on when I'm ready for paint...

 

[Zone cone]

Long bed

I have a nice 84 bed with minimum dents. And tailgate. If your still looking let me no. Il ship if need be.

 

[mike08804]

Make sure you get one off an '85 or newer as the fuel filler necks are different. OR you will have to take the filler neck assemblies off your donor pre-'85 so they will mount properly to the bed.

If you happen to be passing through Reno, I have a good condition rust free pre-'85 bed that I have been using since converting to SRW. It needs some work to make it perfect but it's a good bed. I found a brand new '86 bed that was a take-off of a truck when it was brand new so I'll be swapping that gem on when I'm ready for paint...

omg a b brand new take off !!!!!! I want one so bad and will pay I am from the north east so I really need one with out rust!! I know this is an old thread but anyone that can help me find one I appreciate it.

 

[Swims350]

not sure how well this might help but I saw it on my fb page...


http://gadsden.craigslist.org/pts/4357451613.html

 

[John81287]

I need me one too!!!!

 

[chevyk10]

You can buy all the bed parts separate.


Sent from my iPhone using Tapatalk

 

[John81287]

You can buy all the bed parts separate.


Sent from my iPhone using Tapatalk

Sure can for about 1k! or I can drive to a no rust belt state and snag one for a couple hundred bucks! I'll take option 2 cuz I get to see places I've never been along the way!

 

[Mr Clean]

Sure can for about 1k! or I can drive to a no rust belt state and snag one for a couple hundred bucks! I'll take option 2 cuz I get to see places I've never been along the way!

Or come to Texas and get mine, that I'm never going to use!

 

[John81287]

Or come to Texas and get mine, that I'm never going to use!

How much ya want and is it super clean?

 

[HotRodPC]

Be sure to let everyone know if you do something like that. We could use a parts run from the NorthEast to the Midwest. And I bet you can pick some stuff up here and take it back with you to pass out to those guys. We really do need to figure out a way to move big parts. Beds, Cabs, Axles etc. Some kind of relay or what ever, where members are meeting half way, in one direction, then next time meet someone going the other direction.

 

[Mr Clean]

Here,s the bed. I can go get some better pics if you want.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Mr Clean]

Thinking about turning it into a couch for my shop when I get it built.

 

[HotRodPC]

Thinking about turning it into a couch for my shop when I get it built.

Good idea, but you need to find you a bed that's wiped out in the side or something for dirt cheap. It would be a crime to cut up a bed in that good of shape for a sofa.