1
1x1_Speed_Craig
Latest activity Postings About
-
-
11x1_Speed_Craig replied to the thread New member from North Carolina.Welcome from nearby East Tennessee. :) Craig
-
11x1_Speed_Craig reacted to Andreas Wickman's post in the thread What locker shall I go for? with
Like.
There seem to be a number of options. I have to gather the options and compare them. Once I'm done, I'll come back with my thoughts... -
1Yes, it’s called a selectable locker. The can be electronic, pneumatic such or cable actuated. You’ll need to check what’s available...
-
1What do you intend to do with the truck, and what are you expecting to gain from the locking differential? There are lots of options...
-
1Bought truck for parts a few years ago and this is left. Frame with front suspension. Hopefully some one in the NW area(or anywhere...
-
11x1_Speed_Craig reacted to Old Guy Bill's post in the thread Show me your lowered truck. The lower the better! with Like.
I built this truck in the ‘90s, I worked hard getting the stance I wanted without going too low…
-
11x1_Speed_Craig reacted to TotalyHucked's post in the thread Show me your lowered truck. The lower the better! with Like.
Here's my '85. Roughly a 5/8
-
1By us GMC guys, yes, you will be judged lol. You do you man, whatever makes you happy
-
1Hi all, New to the forum so throwing out a little intro! A couple months ago I bought an 85 K10 to surprise my husband with for his...
-
11x1_Speed_Craig reacted to TotalyHucked's post in the thread Squarebody to GMT400 Chassis Swap with Like.
I haven't seen that one done with an OBS, only with NBS trucks. There's nothing "simple" about it, it's a TON of work. You'll have to...
-
11x1_Speed_Craig reacted to Doppleganger's post in the thread Squarebody to GMT400 Chassis Swap with Like.
Seen the swaps go the other way (especially with pullin' trucks) but not this way. I always figured there was enough SB frames still out...
-
1driver drop 241. Its gonna get a 6.0/4L80 as well. I put a solid axle on radius arms in the front of a big bronco many years ago, but...
-
1I don't think the Original post title said 05+ when I first looked lol.
-
11x1_Speed_Craig replied to the thread 05+ super duty axles?.It's a non-issue, given the '05+ request, but your info isn't 100% correct. '04-down DID use Dana 60s, as well as Dana 50s. '05+ Dana...
-
1Im not looking at the 04 and early. Those require a lot more work to get into vehicles with either new spring hangers to go wider, or...
-
-
Loading…
-
Loading…
