WebMonkey
Full Access Member
- Joined
- Jan 3, 2020
- Posts
- 749
- Reaction score
- 1,627
- Location
- Missouri Ozarks
- First Name
- Chris
- Truck Year
- 1985
- Truck Model
- K20
- Engine Size
- 350
so i got some "go slow" goodies piled in the bed.
the garage wasn't too cold so i thought i'd bolt something on and feel like i was making progress.
i plumbed in the new carb, complete with new shiny vacuum blocking caps and a new return spring.
cleaned up the routing of vacuum hoses. re-bent, flared tubing etc.
i hit the starter and the engine, not an original as i found out, started right up and sounded better than ever.
previously, while dissappointed at the transfer case, i checked the fluid and topped it up.
i put the seat back in and thought i go for a test drive on the new carb.
up and down my gravel road, the response and power were very much improved.
then my np208 blew a hole in itself and dumped innards all over my driveway.
the flying turd lives up to its name yet again.
50/50 scrap it/fix it (the whole truck that is)
just so defeated with this thing.
especially after spending what little cash i had to spare on body panels/rockers, flooring, carb etc.
the garage wasn't too cold so i thought i'd bolt something on and feel like i was making progress.
i plumbed in the new carb, complete with new shiny vacuum blocking caps and a new return spring.
cleaned up the routing of vacuum hoses. re-bent, flared tubing etc.
i hit the starter and the engine, not an original as i found out, started right up and sounded better than ever.
previously, while dissappointed at the transfer case, i checked the fluid and topped it up.
i put the seat back in and thought i go for a test drive on the new carb.
up and down my gravel road, the response and power were very much improved.
then my np208 blew a hole in itself and dumped innards all over my driveway.
the flying turd lives up to its name yet again.
50/50 scrap it/fix it (the whole truck that is)
just so defeated with this thing.
especially after spending what little cash i had to spare on body panels/rockers, flooring, carb etc.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach