Idle problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

liam

Junior Member
Joined
Mar 9, 2024
Posts
23
Reaction score
0
Location
Seatle Washington
First Name
Liam
Truck Year
1984
Truck Model
k20
Engine Size
367
since I bought my 1984 chevy k20 last August i have put on 3 different carburetors on and each time i adjust them after you turn off the truck and start it again it will idle at 1500 rpm any ideas
 

Edelbrock

Full Access Member
Joined
Mar 28, 2025
Posts
446
Reaction score
394
Location
Earth
First Name
Grumba
Truck Year
1977
Truck Model
K5 Blazer
Engine Size
400
I would say vacuum leak. You can build a simple vacuum leak tester at home for free (if you have the materials):

You take an milk jug, and drill a small hole in the cap. Then you insert a piece of vacuum hose into the hole, so that it goes into the jug about 1 inch. Then you put a lit cigarette in the end of the hose, inside the jug. Hook the other end of the hose to one of the vacuum ports on the intake manifold. Then close the choke or otherwise block the intake on the carb. Light the stogie and lightly squeeze the milk jug. The smoke will billow out any vacuum leaks.

Notes:

- Don't use "light" cigarettes, because the paper around the filter is perforated, which will make the smoke less dense.

- Having a helper search the engine with a bright light will help, so you don't have to squeeze the jug and search at the same time.

- Don't do this test too often, or the engine will start acting up every few hours or so, until its gets another puff of that wonderful stogie.
 

Attachments

  • f.png
    f.png
    118 KB · Views: 5

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
3,589
Reaction score
10,963
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
First is the choke functioning correctly and hooked up, not going onto the fast idle cam?

What intake manifold does the truck have? And what carb(s)?

Is the vacuum advance and mechanical advance functional in the distributor? What is your base timing set to?
 

liam

Junior Member
Joined
Mar 9, 2024
Posts
23
Reaction score
0
Location
Seatle Washington
First Name
Liam
Truck Year
1984
Truck Model
k20
Engine Size
367
First it had a DeMon 750 double pumper than it had a edelbrock 650 avs2 now it has a 1406 edelbrock with and edelbrock preformer intake
 

Forum statistics

Threads
45,865
Posts
994,589
Members
39,031
Latest member
ChopSoup
Top