Help Identify a Dana 44 axle.

[CSFJ]

So just an update. Got the dana 44 apart. And wow. Who would do this?
Maybe I should ask what is wrong with this picture

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Sent from my SM-G930V using Tapatalk

Never underestimate the imagination of an inbred.

 

[roundhouse]

Wow
At first I thought that was a dirt dobber nest
(Some kind of wasp like insect that makes nests from mud )

But that’s welding ?

Big question is what’s the rest of the truck look like ??

 

[Arlo]

Here is the rest of the truck. Starting from the bottom. working up. bought an 84 Donor truck for cab and Front Clip. when done will be a K10 SWB Chassis 1/2 ton Leaf springs in Rear, 3/4 Ton in the front, Flat bed with a 496, put a corporate 14 in the rear with a 373 Gear and going to be a Dana 44 in Front. 6 inches of lift in Rear right now trying to determine front do to engine weight.
All in all just another truck to build. plan on keeping this one. I seem to sell them as soon as i finish.

So in short right now there is no rest of the truck.

You must be registered for see images attach

 

[PrairieDrifter]

So just an update. Got the dana 44 apart. And wow. Who would do this?
Maybe I should ask what is wrong with this picture

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Sent from my SM-G930V using Tapatalk

I will say, that is one of the worst cobble jobs I’ve ever seen lololol

I bet you’ll have to replace that steering knuckle, I bet the holes are all jacked up. And a steering arm will be necessary as well