Engine overheating

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1984K20CD

Junior Member
Joined
Oct 22, 2019
Posts
9
Reaction score
6
Location
NW Iowa
First Name
Derek
Truck Year
1984
Truck Model
K20
Engine Size
350
Just bought a 84 K20 has a plow on it was driving home got warmed up then started to over heat 225 plus. Pulled over temp slow goes down. Limped it home, changed thermostat to 180. It idles fine around 190 then as soon as you drive over 30 heats up pull over goes down to 190. Truck has no fan shroud I’m on the hunt for one now. Any thoughts? Looks like 2 core radiator also.
Thanks, Derek
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
5,965
Reaction score
7,431
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
The fan is pretty important at idle, but you’ve described that’s not where the problem is.

May be the water pump or the radiator. Water pumps aren’t too expensive.

You could try draining the radiator into a 5 gallon bucket to see how funky the coolant is. Once empty, you could do a garden hose flush on the radiator.

Might need a new radiator or your current one rebuilt. Also, if there are enough of the fins bent flat, there is a comb that can straighten those out.
 

1984K20CD

Junior Member
Joined
Oct 22, 2019
Posts
9
Reaction score
6
Location
NW Iowa
First Name
Derek
Truck Year
1984
Truck Model
K20
Engine Size
350
Thanks for the info. A guy near me has a radiator out of a 1990 suburban would that bolt in?
 

QBuff02

I like Big Blocks and I cannot lie
Supporting Member
Joined
Feb 28, 2017
Posts
867
Reaction score
1,592
Location
Central IL
First Name
Quincy
Truck Year
1982
Truck Model
K30
Engine Size
454
fan shroud will make a difference as it directs the air through the radiator properly. Also, check the fan clutch if it has one (which i'm assuming it does) it's probably failed or close to failing and the fan is not turning fast enough and drawing the correct amount of air through the radiator. which back to the shroud thing, if it's not pulling enough air it won't cool down correctly. pull the cap on the radiator and look at the condition of the inside if it. it could be plugged up as well. But my money is on the shroud and the fan clutch.
 

1984K20CD

Junior Member
Joined
Oct 22, 2019
Posts
9
Reaction score
6
Location
NW Iowa
First Name
Derek
Truck Year
1984
Truck Model
K20
Engine Size
350
Thank you very much.
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
10,222
Reaction score
14,573
Location
Right where I am
First Name
Bagoomba
Truck Year
1981, 1965
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s; 65-C20 with 4:57 gears and Borg Warner Overdrive
Engine Size
Carb'ed Vortec 350; 1972 L48 350
Definitely clean the radiator and cooling system as a whole. And get a shroud.
 

jjester6000

Full Access Member
Joined
Aug 24, 2019
Posts
879
Reaction score
2,447
Location
Illinois
First Name
Jack
Truck Year
1974
Truck Model
C1500
Engine Size
250
Just bought a 84 K20 has a plow on it was driving home got warmed up then started to over heat 225 plus. Pulled over temp slow goes down. Limped it home, changed thermostat to 180. It idles fine around 190 then as soon as you drive over 30 heats up pull over goes down to 190. Truck has no fan shroud I’m on the hunt for one now. Any thoughts? Looks like 2 core radiator also.
Thanks, Derek

If I were you, I would put a 165 degree thermostat in just to see if you can compensate for the issue, to me it sounds like your radiator may be plugged up (You could use laundry detergent to clean it).

Also did you consider that the plow may be blocking airflow to your radiator? It could all be an airflow issue.
 

1984K20CD

Junior Member
Joined
Oct 22, 2019
Posts
9
Reaction score
6
Location
NW Iowa
First Name
Derek
Truck Year
1984
Truck Model
K20
Engine Size
350
I will clean radiator and cooling system and see what that does. Thanks guys.
 

Hatchet54

Full Access Member
Joined
Oct 23, 2018
Posts
276
Reaction score
249
Location
Wyoming
First Name
Red
Truck Year
1977
Truck Model
1500 Sierra Grande
Engine Size
350
Jester brings up a good point about the plow. If you are driving with it in the up position, that would be a huge change in designed air flow over the radiator. Coupled with a potential water pump/clutch etc. issue that would settle it I think.
All mentioned fixes are quick, cheap and easy. If you decide to go the new radiator route, I recommend a Champion 3 core. They are on eBay for $200 flat, have a lifetime guarantee and I made mine bolt up almost perfect. Water pump is a little more involved but they can be done in a couple of hours and for like $50.

Sweet truck!
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
10,222
Reaction score
14,573
Location
Right where I am
First Name
Bagoomba
Truck Year
1981, 1965
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s; 65-C20 with 4:57 gears and Borg Warner Overdrive
Engine Size
Carb'ed Vortec 350; 1972 L48 350
I have a feeling the biggest culprit is the lack of a shroud. But definitely do the fixes first, as stated, they're easy. I'd shy away from a 160 thermostat unless you're planning to switch it back to a 180 or 195. During the cold months a 160 will never get warm enough to run the heater. It will blow semi-warm air after a while, but it's miserable until the engine gets warm enough to feel warm air from the vents. If you need a plow, you need a warm engine in the wintertime.
 

gotyourgoat

Full Access Member
Joined
Mar 27, 2014
Posts
2,117
Reaction score
3,418
Location
NRV Virginia
First Name
gotyourgoat
Truck Year
1984
Truck Model
c10
Engine Size
smokin' 305
My first thought was the giant plow on the front is blocking airflow...:33:
Maybe ditch the plow until it's cold.
 
Last edited:

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,038
Reaction score
1,836
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
Changing to a 160 degree thermostat will not fix an overheating problem. It will just take a little longer to warm up and overheat :).

I have found it useful to look up the exact year online with Rock Auto and see what they have listed for radiators, fans, etc. GM used a couple different radiator dimensions over the years, and there are 2, 3, and 4 row versions. In most cases you can swap in a larger radiator if you get the right rubber inserts that fit into the radiator support and hold it in place. There are also at least three different fan clutches (standard, HD, and severe duty), and A/C trucks used a fan with more blades (7, IIRC). I think all the 73-87 trucks had a stock fan shroud of some type, so somebody must have removed yours.

Bruce
 

MisterB

Full Access Member
Joined
Sep 9, 2019
Posts
676
Reaction score
845
Location
Northwest
First Name
AJ
Truck Year
1980
Truck Model
GMC K2500 4X4
Engine Size
350
Make sure you don't have an air pocket trapped in your cooling system.

Sent from my SM-N975U1 using Tapatalk
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
1,738
Reaction score
3,738
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
As others have mentioned above, a lower thermostat temp won't fix overheating, as it gives the radiator less of a chance to radiate the heat out, since it is constantly flowing it ends up heating all of the coolant up and then overheating.
 

Forum statistics

Threads
42,182
Posts
910,809
Members
33,675
Latest member
johnalen76
Top