-
-
SSpider replied to the thread Trans braces not installed when motor went in, can I fix with a little welding/fab work?.I’m thinking ac brackets. Although I found some holes on the alternator side, but these don’t match up.
-
SSpider reacted to fast 99's post in the thread Trans braces not installed when motor went in, can I fix with a little welding/fab work? with
Like.
Short ones appear to be rear ac bracket or alt as someone else pointed out. They should go to intake studded bolts. -
SSpider replied to the thread Trans braces not installed when motor went in, can I fix with a little welding/fab work?.Upon further review, we are pulling the motor mounts and installing correctly. Still don’t know what the small braces are for. Was...
-
SSpider posted the thread Trans braces not installed when motor went in, can I fix with a little welding/fab work? in Transmission & Transfer Case.So the trans to motor mount k braces were not installed when everything went in. I’m thinking of making a bracket that bolts onto the...
-
-
SSpider posted the thread Trans braces not installed when motor went in, can I fix with a little welding/fab work? in Transmission & Transfer Case.So the trans to motor mount k braces were not installed when everything went in. I’m thinking of making a bracket that bolts onto the...
-
-
SSpider replied to the thread 90 V2500 Burb restoration.I’m doing a 90 v2500 as well. 1200$ needs a tranny pump, turned into a new trans, then the motor blew, so new motor and a 4” lift. I’ll...
-
-
SSpider reacted to Bosshog454's post in the thread How Will My Square Body Look With XX Lift and XX Tires? with Like.
1991 chevorlet suburban v2500 4x4 4 inch rough country lift 35x12.50r17 toyo open country MT 17x9 mickey thompson classics
-
-
Loading…
-
Loading…
