Engine Mounts
- Thread starter Dwnforce
- Start date
-
- Tags
- brackets engine mounts
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Dutch Rutter
Full Access Member
- Joined
- Aug 13, 2013
- Posts
- 1,075
- Reaction score
- 1,198
- Location
- Independence, Or
- First Name
- Joshua
- Truck Year
- 1984
- Truck Model
- K20
- Engine Size
- 5.7
Those go between the mount and block. Then there are a pair of bars that run from the odd ball hole to transmission bellhousings. I have them on my truck and could snap a pic after work unless someone beats me to it.
The idea is more support and to help keep the trans bellhousings from cracking under torque.
The idea is more support and to help keep the trans bellhousings from cracking under torque.
Bextreme04
Full Access Member
- Joined
- May 13, 2019
- Posts
- 4,206
- Reaction score
- 5,113
- Location
- Oregon
- First Name
- Eric
- Truck Year
- 1980
- Truck Model
- K25
- Engine Size
- 350-4bbl
They weren't on my original 350/TH400, but they were on my 1997 454/4L80E donor combo. Like Dutch said, they go under the clamshell and have a rod that bolts to the trans bellhousing.
Dutch Rutter
Full Access Member
- Joined
- Aug 13, 2013
- Posts
- 1,075
- Reaction score
- 1,198
- Location
- Independence, Or
- First Name
- Joshua
- Truck Year
- 1984
- Truck Model
- K20
- Engine Size
- 5.7
@Dwnforce
Here's an old pic of the other end, pic was diagnosing an oil leak, now fixed.
This is on my 83 with 350 and 7004r as far as I know it's factory.
Here's an old pic of the other end, pic was diagnosing an oil leak, now fixed.
This is on my 83 with 350 and 7004r as far as I know it's factory.
You must be registered for see images attach
Craig 85
Full Access Member
- Joined
- Jan 25, 2017
- Posts
- 3,897
- Reaction score
- 4,042
- Location
- Nashville, TN
- First Name
- Craig
- Truck Year
- 1985
- Truck Model
- K30 SRW
- Engine Size
- 454/TH-400/NP205
I had the strut rods on my '79 K15 350/350/203 and my '85 K30 454/400/205.
Alaska 79 K-10
Full Access Member
- Joined
- Apr 22, 2021
- Posts
- 62
- Reaction score
- 226
- Location
- Fairbanks Alaska
- First Name
- Bryan
- Truck Year
- 1979
- Truck Model
- K-10
- Engine Size
- 454
These were between the block and steel mounts on my 79 K-10 from the factory. When I put the Big Block in the truck, I still needed to use these to keep the spacing like factory. Otherwise the the holes do not line up between the metal mounts on the block, and the cushion mounts on the frame. I found out the hard way.
