SquareRoot
Full Access Member
- Joined
- Mar 18, 2017
- Posts
- 4,346
- Reaction score
- 8,457
- Location
- Arizona
- First Name
- Mike
- Truck Year
- 85
- Truck Model
- K20
- Engine Size
- 350
Just finished swapping in a 93, low ratio, early nv4500 in my truck. Now I'm looking at rebuilding the other 4500 I bought years back as a core. Bought the truck (94 k2500- less engine) for $500. Pulled the trans and scrapped the truck for $300.
Now as I begin to decode this thing I discover it's a somewhat rare beast. It was produced on June 15, 94.
BUT...the I'd tag says it's a GAKD code which has the early bolt pattern but the newer 5:61 ratio 1st gear and removable, square shift tower. I read that these were made but quite rare.
Well, that's cool because both trans fit my AA bell housing. Talk about dumb luck.
Now as I begin to decode this thing I discover it's a somewhat rare beast. It was produced on June 15, 94.
BUT...the I'd tag says it's a GAKD code which has the early bolt pattern but the newer 5:61 ratio 1st gear and removable, square shift tower. I read that these were made but quite rare.
Well, that's cool because both trans fit my AA bell housing. Talk about dumb luck.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
