Any window treatments to clear up "foggy" window edges

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rotten 1

Junior Member
Joined
Jan 9, 2024
Posts
10
Reaction score
29
Location
Tennessee
First Name
Chris
Truck Year
1974
Truck Model
C10
Engine Size
350
Hey there, starting to put some work into a 1974 Chevy C10 and I noticed that the edges of the front window are foggy. I've tried normal cleaning and scrapping with a razor to no avail. Are there any treatments out on the market or special tricks I would be looking at, or is the window as good as it will get?

Unfortunately, the issue did not show up well in the picture.

You must be registered for see images attach


Right now, the window is fully functional, but I'm going to have a friend tint the windows soon and want things as "set up" as possible before that.

Thanks
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,983
Reaction score
7,228
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
Hey there, starting to put some work into a 1974 Chevy C10 and I noticed that the edges of the front window are foggy. I've tried normal cleaning and scrapping with a razor to no avail. Are there any treatments out on the market or special tricks I would be looking at, or is the window as good as it will get?

Unfortunately, the issue did not show up well in the picture.

You must be registered for see images attach


Right now, the window is fully functional, but I'm going to have a friend tint the windows soon and want things as "set up" as possible before that.

Thanks

The foggyness is on the outside of the glass? Not following what you are saying. Could be the inner and outer glass separating from the plastic liner in the middle.
 

Sad Sack

Full Access Member
Joined
Sep 3, 2024
Posts
268
Reaction score
459
Location
Omaha, NE
First Name
Goober
Truck Year
1985
Truck Model
C15
Engine Size
305
Other than trying 000 or 0000 steel wool on the outside and inside glass surfaces, it's a crap shoot.
 
Last edited:

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
4,969
Reaction score
16,531
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
You talking about this stuff? This is on the bottoms of my vent windows. I haven't attempted to clean it up/make it better but maybe someone has an idea

You must be registered for see images attach


You must be registered for see images attach
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,925
Reaction score
14,134
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Hey there, starting to put some work into a 1974 Chevy C10 and I noticed that the edges of the front window are foggy. I've tried normal cleaning and scrapping with a razor to no avail. Are there any treatments out on the market or special tricks I would be looking at, or is the window as good as it will get?

Unfortunately, the issue did not show up well in the picture.

You must be registered for see images attach


Right now, the window is fully functional, but I'm going to have a friend tint the windows soon and want things as "set up" as possible before that.

Thanks
You’re tinting the windshield?
My guess is , your issue is the laminate beginning to separate. If it don’t come off with a razor blade then it’s between the plies of glass.
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,983
Reaction score
7,228
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
If it is on the exposed surface try a 1:10 ratio of vinegar and water.
 

idrivea2002golf

Full Access Member
Joined
Feb 19, 2025
Posts
58
Reaction score
84
Location
San Diego
First Name
Spencer
Truck Year
1981
Truck Model
C20
Engine Size
Not sure yet.
You’re tinting the windshield?
My guess is , your issue is the laminate beginning to separate. If it don’t come off with a razor blade then it’s between the plies of glass.
This is happening to my 81. Only option is to replace the window.
 

Edelbrock

Full Access Member
Joined
Mar 28, 2025
Posts
495
Reaction score
437
Location
Earth
First Name
Grumba
Truck Year
1977
Truck Model
K5 Blazer
Engine Size
400
I have seen this before. As others have said - The layers of glass start top separate from the plastic sheet that is between the layers. It gets cloudy, like there is a fog between the layers. New glass is cheap and really makes a big difference. Windshields "wear out" according to some glass installers. They say that the surface gets micro scratches and tiny nicks over time. It becomes less transparent and more prone to glare. If you have ever replaced an old windshield before, you have probably seen that the new one is amazingly better. Way more clear, and way less glare for sure. You don't notice how bad the old one is until you see the new one.
 
Last edited:

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
4,275
Reaction score
6,652
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
Yep, delamination. Can't fix it, my 70 is doing this.

A fresh brand new windshield is a beautiful thing, windshields do get "wore out". Reuse your factory seal if possible or get a high quality replacement, mine was not useable from damage and the one they put in was junk.

My 79 obviously has cracks but is so sand and dirt blasted the glare is incredibly bad, especially after running a brand new windshield in the burb for a year.
 

xm20k

Member
Joined
May 26, 2025
Posts
31
Reaction score
58
Location
Girard, Ohio
First Name
David
Truck Year
78
Truck Model
c10
Engine Size
388
My 78 has the beginnings of that as well and it's only a 24k mile truck that sat in storage out of the weather/sun for most of its life and was only registered every 3-4 years for road trips/vacations. Already have a new rear window and seal for it, and eventually will replace all the glass.
 

Latest posts

Forum statistics

Threads
45,908
Posts
995,811
Members
39,093
Latest member
Thrawn
Top