Remo76C15
Full Access Member
- Joined
- Feb 12, 2019
- Posts
- 52
- Reaction score
- 7
- Location
- Colorado Springs
- First Name
- Greg
- Truck Year
- 1976
- Truck Model
- C15
- Engine Size
- 350
I am reassembling a 4-bolt main 350 (3970010) from a 76 C15 p/u. Last rebuild was in 94 (data plate on engine). Noticed a coolant in 2 & 4 cylinder. Head gasket looked good so I had the 882 head checked. It was cracked internally. I have a new set of aftermarket heads on the way so I decided to look at the rod/crank bearings as well. Bearings look ok but I want new. The steel ones currently in are FM brand.
Can these old engines use the modern aluminum bearings or should I stick with the trimetal? I am looking at MAHLE/CLEVITE makers. Thanks! GW
Can these old engines use the modern aluminum bearings or should I stick with the trimetal? I am looking at MAHLE/CLEVITE makers. Thanks! GW
You must be registered for see images attach
You must be registered for see images attach