87ChevyR10
Full Access Member
- Joined
- Sep 2, 2013
- Posts
- 1,125
- Reaction score
- 66
- Location
- Kansas
- First Name
- John
- Truck Year
- NA
- Truck Model
- NA
- Engine Size
- NA
Bought one these Equuis Tachs from O'Really a few months back. Been working fine until now. Seems the needle wants to hunt around. If the truck is sitting idling, the needle stays pretty calm; however, once I get moving, that sucker wants to dance around.
Now, the green wiring going to the tach pigtail hasn't been properly done up. I just stuck the wire in there and let it be. Last couple times I've had the air cleaner off, I've found that wire had fallen out. Same thing this last time. I used electrical tape to hold it in place this time and ever since, the tach needle is randomly erratic.
So, is this tach dying or what?
Now, the green wiring going to the tach pigtail hasn't been properly done up. I just stuck the wire in there and let it be. Last couple times I've had the air cleaner off, I've found that wire had fallen out. Same thing this last time. I used electrical tape to hold it in place this time and ever since, the tach needle is randomly erratic.
So, is this tach dying or what?