A clutch pedal adjustment question

[CRM]

For years I've put up with the clutch pedal going almost all the way to the floor to shift gears so I thought I'd try to make an adjustment. I got underneath and pulled the adjustment piece and noticed what looked like a worn spot. I'm attaching a picture. Is this worn or was it originally like this?

You must be registered for see images attach

 

[AuroraGirl]

For years I've put up with the clutch pedal going almost all the way to the floor to shift gears so I thought I'd try to make an adjustment. I got underneath and pulled the adjustment piece and noticed what looked like a worn spot. I'm attaching a picture. Is this worn or was it originally like this?

You must be registered for see images attach

where at does that fit in the system, i can look at mine

 

[Turbo4whl]

Yes, very worn. Almost ready to break in half.

 

[bucket]

Yep, very worn. When new, that pivot point was the same diameter for the whole length of it.

 

[CRM]

Is this a part that can be bought, or repaired?

 

[Turbo4whl]

I'm sure you can find it cheaper:

JEGS (click here)

You must be registered for see images attach

 

[AuroraGirl]

I'm sure you can find it cheaper:

JEGS (click here)

You must be registered for see images attach

Oh now I see what it is lol

 

[idahovette]

Weld and file......good as new

 

[CRM]

Thanks Turbo4whl. Amazon had a Dorman version for under $9. I don't normally go with Dorman but all i need is the worn piece. If it turns out to be inferior I'll go with one of the other brands.

Thought about that Idahovette but I don't have a welder.

 

[CRM]

Received the new part. Looks like it will work although it's not the same exact size. We'll see soon.

You must be registered for see images attach