Joshua8336
Full Access Member
- Joined
- Dec 11, 2011
- Posts
- 298
- Reaction score
- 0
- Location
- Dirty South AL
- First Name
- Joshua
- Truck Year
- 1985
- Truck Model
- c10
- Engine Size
- 4.8
lemme see your square bodies with a 2/4 drop. need some ideas here![Shitsweak :shitsweak: :shitsweak:](/styles/default/xenforo/smilies/shitsweak.gif)
![Shitsweak :shitsweak: :shitsweak:](/styles/default/xenforo/smilies/shitsweak.gif)
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You must be registered for see images attach
First a 2/3 then a 4.5/5
For this drop I had an extra set of front and rear springs. I cut one round off of the front springs and for the rear I removed the short leaf and put the over load leaf on top to flatten the spring out. Best part of this drop is its all free.How did you get the 3 inch drop in the rear?
For this drop I had an extra set of front and rear springs. I cut one round off of the front springs and for the rear I removed the short leaf and put the over load leaf on top to flatten the spring out. Best part of this drop is its all free.
Yeah, I want to get rid of those wheels and tires. I want to go factory. Not sure what shipping from Austin to GA would be though.