86chevyk20
Full Access Member
- Joined
- May 10, 2011
- Posts
- 341
- Reaction score
- 0
- Location
- Buffalo
- First Name
- Liam
- Truck Year
- 1986
- Truck Model
- K20
- Engine Size
- 355
Hey guys i just got finished in putting my 14 bolt ff together and into my k20 and i have a concern.
When i put the drums back on i out the locking nut back in along with that tabed llocking thing along with the next locking nut. I have the concern of i didnt put them in right.
The inner lock nut i put tight and then backed it off about 1/4 turn, and then installed the locking tab and the last nut and bent the tab over. AFter this the drums spin nicly. ( didnt adjust brakes yet)
My other concern is when i took my axle apart i did not see a key for the key slot on the spindle.. Do some 14 bolts not come with them? or should i go get one.
Thanks
guys
Liam
When i put the drums back on i out the locking nut back in along with that tabed llocking thing along with the next locking nut. I have the concern of i didnt put them in right.
The inner lock nut i put tight and then backed it off about 1/4 turn, and then installed the locking tab and the last nut and bent the tab over. AFter this the drums spin nicly. ( didnt adjust brakes yet)
My other concern is when i took my axle apart i did not see a key for the key slot on the spindle.. Do some 14 bolts not come with them? or should i go get one.
Thanks
guys
Liam