tires

  1. H

    Stock 1976 C10 - Need Wheel/Tire size help!

    Hello! I have a 1976 C10. The ride is bone stock and I’d like to keep it that way for the most part. The only thing I really want to change is in a perfect world I could find some 15 or 16” stock looking wheels that are wider with better backspacing and allow a wider tire solely for...
  2. L

    New wheels & tire

    Hey, I was wanting to spruce up my 85 c10 with some new wheels/tires to gain an inch or two before messing with the suspension, I ended up picking out some 17 x 10 wheels and 285/70/17 tires to go with, I was wondering if anyone knew how the fitment would be possibly on stock ride height.
  3. G

    Bigger tires

    So I got a 85 k1500, going to put a 4 in lift on it, has a 350 hooked up to a 700r4, plan on running 35/12.50/18, has 3.73 gears right now, will I have to re gear it?
  4. koolaid77

    Thoughts on going down to 37s?

    Hey guys, new square body guy here and couldn't be happier. I picked up a 1977 k30 on trade for my old 65 C10 a few weeks back and about to hit the road with it. I needed to replace the drives side front wheel bearings. Of course, there was more than I bargained for. Anywho, the truck has 8"...
  5. Big red square

    6" lift what wheel and tire size can I fit? I want 35's but don't know how wide of a tire and rim i can fit.

    I want 35's but don't know how wide of a tire and rim i can fit. Please post pics so I can compare.
  6. 1

    Will this work with 35s?

    Recently came across this listing on BaT with someone running 35s: https://bringatrailer.com/listing/1985-chevrolet-k10-silverado-2-2/ I know the tires are 35x12.50r15 and not sure about the wheel specs. I thought the general consensus here was that you needed a 4" lift with 35s to fit but that...
  7. Zachbell89

    Bore size

    Does anyone know what the hub bore size is on a 79 gmc sierra grande 4x4?
  8. M

    tire width vs wheel size

    I am looking for information on tire width vs. wheel size. I have a 1978 C10 (BIG 10) with stock wheels. I through on some tires at local shop just to get me down the road as previous tures were dry rotted. I am looking at lowering the truck slightly and I saw a guy running staggard on 15x7...
  9. tpripps

    16.5" wheel alternative

    So my newly-acquired pickup has the original 8.75x16.5 tires on the back, though it has 16 inchers on the front. I'm having a heck of a time finding low cost options for the rear. I'm looking for something to just get me by while i'm working on the rest of the truck. Basically looking for...
  10. chevyninja350

    Wide rear wheels.

    I am new to picking out wheels and tires, I am hoping to get some pointers. I have a 1985 Chevy C10 fleetside long bed, I am looking to run wide rear wheels in the rear. I want to run the widest possible wheel without tubing the bed, I want a 15-17inch Rim with a lug spacing of 5x5in (5x127). I...
  11. J

    Swapping from 15” to 20” Help with offset!

    Im currently running 15x10’s on all four with tires that measure 27” tall and 10” wide. I am lowered 2/4. My current rims are -44 offset/3.77” backspacing, which I don’t like. The rears are ok but the fronts stick out from fender at least 1” too much. I want to switch to a 20” setup but not...
  12. J

    Swapping from 15” to 20” Help with offset!

    Im currently running 15x10’s on all four with tires that measure 27” tall and 10” wide. I am lowered 2/4. My current rims are -44 offset/3.77” backspacing, which I don’t like. The rears are ok but the fronts stick out from fender at least 1” too much. I want to switch to a 20” setup but not...
  13. 78Chubby

    Front Tire Width

    Hi all, I've lowered my 78 c10 about 3 inches front and back, and I'm looking for new wheels and tires. I want 20s on it, and I know you can put 20x10s on the back, but is that okay on the front too, or does that make sharp turns iffy? Thanks, Ryan
  14. S

    Advice on rims and tires needed

    Greetings, I was looking for some advice on tires and rims. What I have is a K20 and I believe it may have a 4 inch lift on it. It was that way when I purchased it. There are blocks in the rear under the springs that measure 3 1/2 inches and there is heavy springs on the front. The current...

Latest posts

Forum statistics

Threads
41,856
Posts
903,621
Members
33,370
Latest member
mitchell1128
Top