Search results

  1. T

    its been a year and a half

    its been a year and a half since i took out my 700r4, and replaced it with a th350. witch lost reverse about a month later, other than no reverse, its been a good tranny, no leaks, good firm shift. just goota be carefull were you park. i do miss overdrive, and lower 1st gear. so next week im...
  2. T

    th350 broke in reverse

    thanks for the info.
  3. T

    th350 broke in reverse

    i do have 1st. whats eating at me is why it was binding in the 1st place, i know i did something wrong, is it possible a forward clutch was engageing at time reverse clutch was locking up? i doubt if disassembling would show why. you could tell there was some conflict going on when in reverse...
  4. T

    th350 broke in reverse

    back in Oct. i rebuilt a 74 mod. th350 tranny, useing hotrods excellent photo in structions, the build went well, no leaks, shifted perfect. the only thing i noticed was when i was in reverse and tried to move backwards it felt like it didn't want to move, till you gave it enough gas, like...
  5. T

    My TH350 Rebuild

    [/IMG]heres some pictures of spring depresser. i wouln't call them tools, just a means toward an end. when i was done i through the wood back in the scrap pile.
  6. T

    My TH350 Rebuild

    this is my 2nd attempt to reply to your question, i gave a long instuction on how to fabricate a simple spring depreser and other tips. but when i hit post reply it said i wasn't logged in , when i was. so then i logged in again, and it lost the whole thing. so to answer your question, one day...
  7. T

    My TH350 Rebuild

    i just finished a th350 rebuild. my 2nd tranny build. my 1st was a 700r about 6 yrs ago. this time i put the manuel aside and followed hotrod build in this section. piece of cake. but good luck trying to get anyone to give you timely advice.
  8. T

    no power in reverse

    just finished th 350 shift kit and total rebuild. and swapped out 700r put in th350. seems to be doing pretty good, the shifts are kinda harsh, and sifts a little to soon for towing, gonna put the modulater spring back in to smooth things out and change springs in gov. for later shifts. the only...
  9. T

    Turbo 350 Build

    i didn't have an alignment band for the pump, and already had the rest put back to gether so i couldn't flip it over and put it in the case, so i looked around for something to fit the bolt holes, i came across some hinge pins from a 94 S10 blazer they fit nice and tight in the bolt holes, in...
  10. T

    Turbo 350 Build

    first i just wanna say your post of this tranny build is a great piece of work. that kind of info is priceless. i spent the past two days building my th350. had my laptop on the bench and followed your build step by step. i can't thank you enough for all the hard work to produce. if your ever in...
  11. T

    TH350C to TH350 swap

    i just ordered a 350 rebuild kit and shift kit on ebay the seller is transparts warehouse. the shift kit has an option with it to convert a 350c to a 350. hasn't come yet, maybe by the end of the week. im going from a 700r to a 350.
  12. T

    4L80E Rebuild - Decent price or too much?

    you should build it yourself. i built my 700r out of desperation. i dont trust anybody to touch my stuff. i bought a manuel and when i was done and it worked. as far as special tools go, you be serprised what you will come up with. like to compress the spring on the low reverse, i clamped a...
  13. T

    what tranny rebuild kit do ya like?

    There's a lot of tranny building going on, but i dont see much talk on the kits. what kit did you use, were did you get it, why did you choose it. what do you look for in a kit. I've been looking at kits till my eye's bug. the best one's seem to be on ebay. i found one that has everything plus...
  14. T

    Adapt 4x4 Th350 in Place of 700r4

    i guess Tcase and torque converter share the same initials, i ment the torque converter bolt pattern. and do ya measure from the center of the bolt hole to the center of the Tconv. and double that to get the hole pattern # ?
  15. T

    Adapt 4x4 Th350 in Place of 700r4

    i went back and looked, couldn't find one word on how long the finished shaft was or how much you cut off.
  16. T

    Adapt 4x4 Th350 in Place of 700r4

    i found a spacer kit with no shaft you can view the instuctions on pdf it said to get a shaft out of a car tranny with a 6in tail and measure from the center of the speedo gear clip hole out to 31/4in and wrap tape, and cut off 13/8in including the saw blade. now is the T/C bolt pattern the same...
  17. T

    Turbo 350 Information and Facts

    ok i just found installation instrucktions on pdf for the spacer kit, without the shaft. it say's to get a output shaft from a car tranny with a 6" tail piece, witch is what i have. it says to measure 31/4" from the center of the speedo gear clip hole. and cut off 13/8" . does that sound right...
  18. T

    Turbo 350 Information and Facts

    no i have two 350 trannys one from a 4wd and one from a car. im cutting the car tranny out put shaft down to use in the 4wd tranny to make up the diferance in lengh of the longer 700r case.
  19. T

    Turbo 350 Information and Facts

    its a 27 spline, the problem is the 350 case is shorter than the 700r case so you have to use a spacer, the shaft can only be obtained by buying a spacer kit wich has the right lengh shaft or cutting down one from a car tranny. i have one to cut down, but i need to know how long to make it.
  20. T

    Turbo 350 Information and Facts

    forget everything above its all wrong. i did the comparisons several months ago, i was just looking at the bolt patern, i just went out and did it again. the 4wd case is much thicker at the bellhouseing. and the guts a lot diferant behind the pump, the 350c has got a much wider heavy duty band...
  21. T

    Turbo 350 Information and Facts

    the info here is great, but for one thing, could somebody please tell me what the finished lengh is of the output shaft wether from the kit or cut down from a car tranny. im doing a swap from 700r to 350. i got a 350 out of a 75 4wd and a 350c out of a 84 pontiac. i've guted both trannys i...
  22. T

    just joined bowtie brothers

    great to find like mined souls. most of my friend drive fords. iknow iknow but what can you do? been driveing and working on chevy's since i was 12, first in the woods later on the street. my latest project is swaping out a 700r for a 350, need a little help, i've already made a post on that...
  23. T

    Adapt 4x4 Th350 in Place of 700r4

    i think we came to the party to late, i just got two trannys one out of a 75 4wd, one out of a 84 pontiac. the 84 is a lockup converer. now someone in an early post said the 4wd bell houseing was much stronger, i have both sitting side by side, there is no diferance in the case's except one has...
  24. T

    Adapt 4x4 Th350 in Place of 700r4

    i wish hotrod could have found that cut shaft and posted the lengh it woul save me a lot of grief.

Latest posts

Forum statistics

Threads
42,116
Posts
909,507
Members
33,611
Latest member
RNFL
Top