Search results

  1. S

    1984 4x4

    1984 Chevy 4x4 Rebuilt 350 and Th400 Tranny NP203 Tcase with Twin Stick Setup New Hooker Super Comp Longtube Headers Brand New Exhaust Dana 44 Front and Gm 14 bolt rear with Disc Conversion 3 Inch Lift Summit Carb (Holley 4150 Clone) and intake New Gas tank and external fuel pump New...
  2. S

    SBC Headers

    Came off the truck, Don't believe they were the right ones but they worked and fit pretty decent. PO put them on the truck, I traded them out for Longtube Hookers. They are shorties. Posted them on Facebook and was told they were 3rd Gen Camaro/Fireturd Headers $75 Shipped
  3. S

    Rear Spring Hangers

    Going to need a new one atleast on one side, will probably do both. Was thinking of just buying a shackle flip but I dont want to go any higher to be honest. Can we buy just stock style spring hangers for under the bed, along with a shackle somewhere cheap, or do i need to do a shackle flip?
  4. S

    Anybody running an X-Pipe?

    Curious if anybody else is, going to run one on mine and curious if anybody has some pics on a 4x4 of the placement
  5. S

    Bed Mount measurement and a Headlight Question

    84 K10. Curious if somebody could get me a measurment of the rear most bed mount on their long bed truck. Talking about the standoff from the underside of the bed. Mine are both rusted which is causing one corner of the bed to sag. Plan is to cut out the rust and use square stock to go the...
  6. S

    Body Mounts

    Thinking about replacing my body bushings and have seen soem people post about the nuts thte body bolts go into breaking loose and causing issues. How common is this? Are the nuts really that loose or what? Also is this more commong on the rear mounts and such? Anybody also have any...
  7. S

    Reverse Light Switch

    Curious what activates the reverse lights? Is there a switch in the column or what? Don't have reverse lights and am wondering if a switch may be the issue. The gear indicator also doesn't work so im wondering if that may be part of the switch or what?
  8. S

    Flexplate cover bolts

    Anybody know the bolt size for the cover on a TH400? Ive seen 1/4 x 20
  9. S

    TH400 Bolts-Flywheel inspection Cover

    Anybody know the bolt size? I keep Seeing 1/4-20 but they seem a bit small
  10. S

    Anyway to tell frames apart?

    So my square i have found since I have had it home is a c10 body on a k?? chassis. I was told the axles were swapped in to the half ton frame. The rear is a 14bff and the front is a D44. Trying to figure out if they were really swapped in or if the whole chassis was a 3/4ton. Is there anyway...
  11. S

    Where can I get a Tailight harness

    I have brake lights but no tail lights or reverse lights. Started checking wires and found that the wires were ripped out of the plug where the tail light harness plugs into the rest of the main harness run down the frame. So basicly i need the plug and maybe 6 inches of wire atleast or would...
  12. S

    What SBC header are you running on a 4x4?

    Not looking for anything fancy, just a set that will clear the fram and fit. Want long tubes. Thanks
  13. S

    How much of a Body Lift is needed?

    To put a 2 wheel drive cab on a 4x4 frame? Tonight was the first that ive really been able to crawl under my truck and look over the body mounts and such. The truck has a body lift in it but its as about as redneck as can be. Mismatched puck sizes with massive amounts of shims on the smaller...
  14. S

    Junction Blocks, Options and Opinions?

    Anybody run a junction block in the cab so that way you only have one lead coming in to tie everything to? Was thinking something like this to tie multiple grounds into and this on the right or this to tie the hot leads into? Or do you guys have any others out there that...
  15. S

    Bedliner

    Anybody still make some decent ones? Was going to just got buy a rubber mat but i want something that actuall goes up and protects the wheel humps. Want it to protect from dents and dings as their isn't a single dent currently in the bed. Anybody still make the plastice liners and such? Not...
  16. S

    Battery Leads

    Just wanting to double check but where should all my leads be going and how many. Looking at my truck it appears I may be missing some. Thanks
  17. S

    Autometer Gauges, are the Sending units specific to the brand?

    My 84 needs some wiring clean up, 84 c10 on a 4x4 chassis with a ton of loose wires and such. The factory water temp gauge doesn't work, the autometer temp gauge doesn't work, same with the oil pressure (factory and autometer). The gauges are kind of redundent. Would you guys remove the...
  18. S

    4x4 C10??

    Yeah i know C10=2wd and k10=4wd but trying to figure out best way to tell if I have a C10 body on a 4wd frame. Bought the truck and it has a 14bff rear and a D44 front. Previous owner says the guy before him put 3/4 axles under it. Well when crawling under the truck it does appear to have new...
  19. S

    Chevy Truck Guy From Ohio

    Have owned a few Chevys in my Past a 1990 k1500 in Red which was a Pile (218k on a 4wd though) and my current trucks. Most of my vehicles have been Chevy's and the few that weren't seemed to always be breaking down with the exception of a Neon My real Pride and Joy 1997 k2500 that is currently...

Latest posts

Forum statistics

Threads
42,151
Posts
910,153
Members
33,646
Latest member
M37M35
Top