Search results

  1. G

    Shaking While Stopping??

    it feels like the cab-seat is shaking but I just replaced all rear brake parts drums-shoes-ect.
  2. G

    Shaking While Stopping??

    Well after all new rear brake parts - shoes drums adjuster kit spring kit parking brake cables it Still does it!! Grrr. I don't know what it could be and it only does it when stopping from over 35 mph
  3. G

    Front & Rear end Swap Question??

    So my drive shaft will bolt right up then? Also on the front axle to swap the gears isn't it just having to pull the front axles out a little then the diff and just swap it or no? Lol
  4. G

    Front & Rear end Swap Question??

    Ok so I was checking on craigslist and a guy near me has a set of front&rear axles compleat for sale says the front is a dana 44 and rear is a 14bolt 10.5 inch 8 lug full float and both axles have 4.10 gears. He said the guy he got them from pulled them from a 78 suburban. Now will...
  5. G

    Np208 Won't Shift Into Neutral Or 4 Low?

    My transfer shifts from 2wd to 4hi to neutral to 4low but only go's into 4hi and 2wd
  6. G

    Rear Disc Brake On K2500??

    Yea I checked ther but there all for ff rear ends mine a sf.
  7. G

    Shaking While Stopping??

    My cables are pretty crappy I think I'm going to unhook the line at the t on the rear end and put a plug in it so the rear brakes won't work at all and test it on my road (not busy road) Then see what that does.
  8. G

    Shaking While Stopping??

    I brought them and the guy said they have been turned befor and there not enough left and said if it has been turned to much could cause only the middle of the pad to touch.
  9. G

    Shaking While Stopping??

    Lol I'm thinking it might be drums just saving up some $$ there not cheap!
  10. G

    Shaking While Stopping??

    It feels between cab and box and my truck doesn't have a arms just steering knuckles and I've replaced ball joints allready also the cab mounts are good and box is secured down.
  11. G

    Rear Disc Brake On K2500??

    It's the 9.5 with 14 bolt 11in drums If i do go disc I don't need a parking brake set up as I never use it.
  12. G

    Rear Disc Brake On K2500??

    Is this possible to do on a k2500 8 lug truck? I'm pricing a compleat overhaul on rear brakes and it's pretty costly if I could do a disc brake swap I much rather do that.
  13. G

    Shaking While Stopping??

    Well I still have some issues to fix like parking brake cables have drums turned I'm going to get new rear brake adjuster kit. I've never had it Alined as I only had it for a few months now. But when driving down the road it goes stright and no left/right vibrations in steering wheel at high way...
  14. G

    Shaking While Stopping??

    Yea the only parts store around my area is advance auto and auto zone.
  15. G

    Shaking While Stopping??

    Yea I think that's my next step local machine shop told me $15 a drum to turn them. Hope that works
  16. G

    Shaking While Stopping??

    Ugh still got the damn shake has new front upper/lower ball joints reapacked wheel bearings new spindle bearings checked tie rod ends put new rear wheel cylinders in. The kfront brake pads like new the calipers where replaced befor I got it and work good. Rear shoes still looks to have lots of...
  17. G

    Rear Axle Bearing Play Some or None?

    Ok so should there be any play in the rear outter axle bearing or none? I have a little bit doesn't seem to be a lot tho. There is no leaks from the seals.
  18. G

    Shock Boot On Driveshaft?

    Ok so I was thinking on my front spline joint on front driveshaft would it be able to put a shock boot on there to keep unwanted mud/sand/ect out of it with out it bothering the driveshaft?
  19. G

    Damn Hubs

    Yea I'm missing a spring behind the gear bigger gear ugh po's must of had there hands in it and f$@ked stuff up. I'm ordering new warn premium hubs tonight for it. Thanks for pics and nice truck
  20. G

    Damn Hubs

    Ok so I've got an issue I think? I got locking hubs and I noticed when's removed hubs for inspection, I only have a spring on the pass side behind hub as the driver side I don't ? Do I need 2 or none at all? And I think my pass side hub isn't working proper do to missing parts. Does anyone...
  21. G

    Ball Joint Replacement First Time!

    Well it's all back together so thanks everyone I can't take it for a test drive as my garage door broke and I can't open it right now lol. Now I just have to find my hub problem ugh.
  22. G

    Locking Hub Question?

    And I think I posted this in the wrong section damn
  23. G

    Locking Hub Question?

    Ok so I noticed on my pass side with tire off ground and in locked position it doesn't spin the driveshaft to the t-case? The front axle it self is spinning so no broken u joint. Also I noticed the driver side doesn't have a spring behind the locking hub as the pass side does but that side...
  24. G

    Does Your Exhaust Exit Rear Under Bumper? Kit?

    Ok so my plans are once the weather gets nice is to install some summit headers on my truck and run duel exhaust stright out the rear under the bumper. I've been looking for kits online but can't seem to find any? Does anyone on here have the same setup on there truck?
  25. G

    Help Want A 4" Suspension Lift With All New Springs

    Ok so my 86 gmc k25 has 33's on it now and is stock hight. I'd like to go with a 4" lift just to make more clearance when off the road and in incase I wanted to add larger tires in the future. Also the fact that I don't really want to start messing with driveshafts and pinion angles and a t-case...

Latest posts

Forum statistics

Threads
42,292
Posts
913,103
Members
33,792
Latest member
Twistedwhisky
Top