Search results

  1. 82chevy350

    1982 c10 Driveshaft

    Ok guys I found out m driveshaft is bent hopefully that is the reason im breaking bellhousings. Anyone know the length for a 82 c10 longbed with th350 with long tailhousing with a 10 bolt rear?
  2. 82chevy350

    Solid Motor Mounts

    Hey guys im trying to find some solid motor mounts that are direct bolt in on my 1982 c10 2wd sbc. I am having no luck finding all 4 mounts. Does anyone on here know which ones will work or make them and sell them?
  3. 82chevy350

    Whats Gears Should i Run

    Ok guys so im in the process of building my 383 stroker roller motor for my 82. I also am gonna start rebuilding my rear end in college since its making noise(whining). The 2.73s just aren't cutting it anymore so I decided to go to a lower gear. I told my teacher I wanted to do 4.56 gears and he...
  4. 82chevy350

    Windshield wsher

    Ok guys on my 82 c10 I am having problems with the windshield washer operation. I haven't used the washer in about a year cause my tank was cracked well I hooked the tank up and it will not pump all the lines are clear and the washer clicks so I know its getting power. Plus I even jumped it and...
  5. 82chevy350

    Motor Mounts Wont Line Up!

    Ok guys so I was really hoping to get my 350 into my jimmy Yesterday but ended yup with no luck!:slap: I have a 1978 GMC Jimmy 4x4 and I had got a set of mounts to the motor (clamshells) from a 1981 GMC Sierra 2wd and had bought a set of the rubber frame mounts for my 1982 C10 2wd but decided...
  6. 82chevy350

    K10 steering box

    Ok i have a question on my 76 k10 the top gasket for the plate that has the adjusting nut on it is leaking. Is there a part number for the gasket(o-ring) i bought a rebuild kit and it wasnt included i can get a different kit with it but id hate to have all those extra seals
  7. 82chevy350

    10 bolt axles in 12 bolt housing

    Ok guys my old 82 c10 currently has a 10 bolt with 2.73 gears I currently have picked up a 12 bolt with 3.73 its a 6 lug. I wanna keep the 5 lug currently on my c10. My question is can I take the axles and spider gears from the 10 bolt and put them into the 12 bolt housing using the 12 bolt...
  8. 82chevy350

    35" tires 4" Body Lift

    Ok so i recently got me some 35" Kumho Road Venture m/ts they are 35x12.5/R15 and currently have a 4" suspension lift on my truck.. I noticed if i took this thing wheeling or mudding i will make contact with the front part of my fender.. So my question is what are my options I really dont...
  9. 82chevy350

    Swap Turbo 350 for 400

    Ok i have a 82 c10 longbed im in the process of building a 383. As of righ tnow i got me a temporary motor for the 82 that im gonna put in with my turbo 350. The turbo 350 is a longtail. I got a guy wanting to trade a rebuilt 350 010 nickel block and a turbo 400 trans out of a 1 ton. The turbo...
  10. 82chevy350

    Turbo 350 not upshifting

    Ok guys i need your help. I started my truck this morning and drove it about 1/4 mile the trans was shifting good then all of a sudden it dropped down to first gear. It still has reverse and neutral and park but no 2nd or 3rd even when i manually shift. Do you guys think my governor is bad?
  11. 82chevy350

    K10 thumping feel

    So on my k10 i recently installed 4 inch lift springs front 3 inch lift blocks in the rear New trans mounts Rebuilt driveshaft with extra 2 inches of slide room 1 inch in and 1 inch out along with stock movement Transmission and transfer case Rebuilt torque convertor My problem Is...
  12. 82chevy350

    Dana 44

    Ok guys so im about to go through my dana 44 i got sitting and put new seals and clean it up so i can put it in my truck.. My question is how many seals are there? I need to know because im gonna buy all the seals tomorrow and want to make sure i got them all.. :bowroflwerd6:
  13. 82chevy350

    76 k10 vibration

    I have a 76 k10 with 3 inch blocks no taper an i believe 4 inch fromt springs I recently had a new slip yoke an stuf shaft put on my driveshaft my old one had alot if slop in it... I now get alot if vibration or shudder when i accelerate but when i left off the gas it rides smooth and nice...
  14. 82chevy350

    Rear brake lines

    Well looks like i gotta make some new rear brake lines any one know the length or the right and left line? Also what size line do i need
  15. 82chevy350

    Transfercase

    well i bought a used transfercase for my 76 for 50 bucks and got some free centercaps and a windshield for 10 bucks lol.. got a hell of a deal But i installed the 203 and its still popping but not as bad i gotta get this thing ready for the trails So im looking for a good np203 or a np205...
  16. 82chevy350

    383 Build

    So i havent been on in a long time i been ti tired and busy to do anything.. lol I sold my 1954 willys to do this build for my 82.. Its a vortec block and have bought a 383 eagle balanced rotating assembly for it.. Im thinking about going with a LT4 hot cam and was wondering what yall think...
  17. 82chevy350

    Fuel Guage Pegged

    On my 76 the Fuel gauge pegged out past full. When i turn the truck on i can see the gauge move a hair but when i shut it off nothing happens.. I can bang on the dash repeatedly and the gauge will move more towards where it should be. But when i turn it on again it pegs out. Bad Ground? Bad...
  18. 82chevy350

    Parts Truck

    So a buddy of mine wrecked my four wheeler awhile back and i been after my money for awhile but now he says he cant come up with it.. So he said he has an idea that he said his boss is giving him a 77 lwb pickup and that he wanted to take the trans and motor and rear end from it but it would...
  19. 82chevy350

    Lifting the front

    So on my 76 i was reading you can swap 52 inch springs up front to get a lift well would rear springs off my 82 c10 work? i have a 3 inch block in the back
  20. 82chevy350

    Np203

    so i think my chain is slipping its making a popping noise under a load should i try to fix my tcase or be better off finding a used one thats part time or full time... will i need adapters and drive shafts if i get a part time i already have manual front hubs
  21. 82chevy350

    350 Problem

    My 76 has a 350 that is having some problems. I keep fouling number 8 spark plug it gets oily(wet). I got a set of 305 heads off a buddy that i put on the motor for torque. Anyway the truck smokes like its getting oil in the cylinder all other plugs burn dry light brown colored.I have yet to do...
  22. 82chevy350

    Rare Heater?

    Found it in the back of the 76 when we cleaned it out
  23. 82chevy350

    WoW

    http://www.youtube.com/user/MadRam11
  24. 82chevy350

    Timing

    On the 76 the motor i built was a 350 with 305 heads 58cc chamber i know stock timing is 6 degrees and i know since i bumped my c.r up it idles good at 6 degrees
  25. 82chevy350

    Swap Axles

    ok on my 76 it has the type of front axle thats locked there are no manual locking hubs my front and rear end are in bad shape. i can get another front and rear end for 300 bucks new gears in front but its got the manual locking hubs.. Am i ok to put the manual axle on my truck and will it help...

Latest posts

Forum statistics

Threads
42,219
Posts
911,595
Members
33,727
Latest member
Ls85c10man
Top