shawn57nomad's latest activity
-
Sshawn57nomad replied to the thread Got my 17” steelies in!.Any pictures of them mounted? If so what size tires? Thanks
-
Sshawn57nomad posted the thread 17 inch steel wheels- 81 C10 2wd 5/6 static drop. in Wheels and Tires.Looking at running a staggered set-up with 17x8 4.5" BS up front and 17x9 5" BS out back. Any thoughts and pictures would help. Black...
-
-
SI wish I could take credit for the list but another gentleman put that together, I don't know what he ended up putting it at. I took...
-
SYes they will. I run the same shock on my bagged truck an the ball joints bind up before the shock bottoms out. They still had 1/8"...
-
S6" in front is maybe too much..whit tall rim and tire..youy gonne hit the inner fender before botom out! got 29" tire with 4.5 front...
-
STotally get the lowing it makes the distance between the transmission and pinion shorter but the weird thing about it was I removed the...
-
Sshawn57nomad reacted to Dr Evil's post in the thread Finally getting to drive it 4/6 drop with
Like.
I have a build thread somewhere but thought it may help others finds info here. Western Chassis 2.5" drop spindles and 2" drop springs... -
Sshawn57nomad reacted to Keith Seymore's post in the thread Sticky thread for lowering C10s? with Like.
We did about a dozen trucks back in the day (a '69, a couple '75's, '77, a couple '80's, '82, and a couple '87's off the top of my...
-
Sshawn57nomad reacted to Retoxtony's post in the thread Flip kit ended up too low. Now what? with Like.
I might as well update this for anyone who runs into a similar problem. After looking into all the options I decided to add a set of...
-
Sshawn57nomad replied to the thread Brake hose issues with lowered front end C30.How long are the hoses? My kit came with 24" and they seem to need to be routed under the upper arm and not as they were factory. CPP...
-
-
Sshawn57nomad replied to the thread Flipped axle Caltracs?.Had to trim about 4 inches off the front of the overload leaf. This truck was ordered as a 250 with MM7/MY6 4 speed and 770# rear light...
-
-
SI don't disagree with anything huck said. Check your bushings too, honestly if they need replaced I'd buy the tube uppers. The bushings...
-
Sshawn57nomad reacted to bluex's post in the thread upgrading your square with a hydraulic clutch with Like.
For better or worse here's where it wound up. Haven't hooked it to the pedal yet but it's lower than I wanted it to be. Can't go any...
-
Sshawn57nomad replied to the thread MY6 250 6 cylinder Swap to LS Gen 3 and TKX.Notches complete. Still uncertain about welding them in.
-
-
Sshawn57nomad reacted to Scruffy49's post in the thread MY6 250 6 cylinder Swap to LS Gen 3 and TKX with Like.
Funnily enough, that is exactly why I had Lisa order me an engine hoist… So much easier than buying a keg and 4 or 5 pizzas and lining...
