Thank you all lots of helpful info not exactly sure what im going to do yet but i have a sm465 in the truck originally i believe so if i can find the adaptor ill probably go with that then
Hey all i just swapped my sm465 for a nv3500 for the overdrive and am having trouble figuring out how to rig up the hydro line to the slave cylinder. I have the quick connect from the original truck the nv3500 came out off but it doesnt have a thread end to thread into my master cylinder and...
I've decided to do swap a 12v cummins with p-pump into my 78 v20. i have the full dodge truck to swap everything but it is an auto(which is dieing) and want to make to a 5speed and was wondering what are decent options besides finding an nv4500, tried everywhere and still looking but its looking...
I've got the bolt to go in there but i couldnt get one close to the same length was either 1 inch to short or like 2 inches too long so i grabbed the longer one and am just gonna thread it and cut to length
Recently replaced my water pump in my 87 350 TBI and noticed the bolt that the alternator pivots on is broken and im going to have to drill it out of the head and re tap and was wondering if anyone could tell me the length of the bolt its self and possible the length of thread on the bolt
Recently purchased my truck and it already has a trailer hitch on it but its seems like no one ever wired up the trailer light plug and i've never done any real wiring before and was wonder if i could get some advice for wiring a 7 pin trailer plug. For some reason the truck already has a break...
Recently got an 87 v20 with a TBI 350 and when it idles it sounds as if half cylinders arent firing but once you press the accelerator it runs fine. I rebuild the throttle body thinking maybe an injector o ring was bad but it didn't change. Every now and then it idles fine. I'm going to replace...
I have a 1985 c20 with a 350 v8 in it and the body and stuff isnt in the greatest of shape and its only 2 wheel drive and an automatic so i decided to buy this friends parts truck which is a which is a 4x4 c20 with a 4 speed standard and the body is in alot better shape but the 305 in it doesnt...
I havent checked the cable yet so i dont know if its frayed or not but when i re built the carb i didnt replace any throttle bushing so either the ones in there are bad or its something else. As for the A/C idle kick up solenoid i dont believe there is one on the carb even though i have A/C in...
I recently obtained a 1985 c20 with a 5.7l 350 and had to rebuild the quadrajet carb im having a problem where i cant get the idle speed to stay at a normal rpm. Ive messed around with the idle screws and still cant get it to get lower then a medium rev. I can use my hand to pull the throttle...