Gauge/idle Fuse

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mitchell Scheer

Junior Member
Joined
Oct 24, 2020
Posts
12
Reaction score
2
Location
West Greenwich, RI
First Name
Mitchell
Truck Year
1986
Truck Model
K10
Engine Size
5.0L (305)
Hello,

I am having a problem with the gauge/idle Fuse. It keeps popping Everytime I got to start the truck. All other fuses are good.
It's a 86 chevy K10. Any advice?
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,338
Reaction score
3,571
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Start by giving the wiring under the dash a through inspection. Is there anything extra plugged into the fuse box? Any add on accessories?

Have you done any recent work to the dash? Maybe driven a screw into a harness?
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,602
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I gotta ask..what's an "idle fuse?"
 

Mitchell Scheer

Junior Member
Joined
Oct 24, 2020
Posts
12
Reaction score
2
Location
West Greenwich, RI
First Name
Mitchell
Truck Year
1986
Truck Model
K10
Engine Size
5.0L (305)
All I did was put new rocker panels on. I haven't done anything under the dash.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,338
Reaction score
3,571
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
I gotta ask..what's an "idle fuse?"

I think on certain model years they used a idle stop solenoid. Not the fast idle solenoid most people think of when mentioning a idle solenoid.

anytime the ignition was on, the solenoid is activated. The idle solenoid is what actual controlled idle speed. Turn off the ignition, the solenoid shuts off, the throttle closes further than it normally would.

This was an attempt to stop the engine from “dieseling”.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,338
Reaction score
3,571
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
The sending unit is on the ground side of the gauge, if the wire was grounded the worst that would happen is the gauge would read empty. Assuming the gauge cud get power from the blown fuse.
 

Mitchell Scheer

Junior Member
Joined
Oct 24, 2020
Posts
12
Reaction score
2
Location
West Greenwich, RI
First Name
Mitchell
Truck Year
1986
Truck Model
K10
Engine Size
5.0L (305)
It was the black pink wire coming from the fuse box. I think that leads to the fuel gauge?
 

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
994
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
@SquareRoot,

Ha, ha, ha, I was going to ask the same question. Never heard of it. I had a idle solenoid on my carb but disconnected it. It held the throttle linkage off idle to long and was problematic in that it wouldn't come off by tapping the peddle lie I was supposed to. But to hold the throttle closed to eliminate dieseling, that's laughable since they had to have known it was to low octane fuel and timing and all that transition to unleaded gasoline that was causing it all. Big American cars weren't designed for sissified unleaded gas from a bunch of European front wheel drive wimps.
More liberal crap trying to solve a problem that didn't exist.
 

Forum statistics

Threads
41,859
Posts
903,656
Members
33,372
Latest member
83elcowes
Top