82silverado01
Junior Member
- Joined
- Sep 17, 2018
- Posts
- 15
- Reaction score
- 5
- Location
- TN
- First Name
- Jamey
- Truck Year
- 1982
- Truck Model
- Silverado C10
- Engine Size
- 350
I’m just a beginner. These pictures are of a carb that says Holley manufactured for Motorcraft and its on a 350. Previous owner had two springs rigged up on throttle where this new spring is because he said spring was too weak. I think there’s more to it than that. Truck has sat for years. The end of cable looked dirty (as in dirt was coming out when I worked it by hand) so I sprayed some dry lube on it and worked it a little. Doesn’t feel bad now, but still won’t idle down part of the time.
Sent from my iPad using Tapatalk Pro
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Do I need a new cable or is the spring wrong or in the wrong place? Also, am I supposed to have a choke of some kind hooked up? I bought this truck from family and they were putting this 350 crate motor in new in place of 305 and lots of things are left undone and possibly not needed. Project got put on hold for several years lol. Uncle says manual choke cable under dash “may not be needed”.Sent from my iPad using Tapatalk Pro