Square on the Interstate

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wrighteous17

Junior Member
Joined
Aug 24, 2016
Posts
3
Reaction score
0
Location
Spencer, IN
First Name
Kevin
Truck Year
1987
Truck Model
V1500
Engine Size
350
So I did some research and it turns out in 1980, a federal legislation was passed that required all auto manufacturers to reduce the speedo to 85mph max in an attempt to conserve energy and slow everyone down during the energy crisis (even though most cars could go much faster). Ronald Reagan helped repeal the legislation in 1981, however most cars/trucks continued to use the same speedo until a new model came about.

Guess that would explain why my 1987 V10 speedo only goes up to 85mph.
 

rich weyand

Full Access Member
Joined
May 28, 2014
Posts
964
Reaction score
162
Location
Bloomington Indiana
First Name
Rich
Truck Year
1978
Truck Model
K10
Engine Size
350
Yup. It was supposed to be safer not to let people know how fast they were going.

Prior to that, most auto speedometers went to 120, with 60 straight up in the middle. A glance could tell you whether you were going 60, or a bit above, or a bit below.
 

CRM

Full Access Member
Joined
Jun 6, 2016
Posts
1,188
Reaction score
2,775
Location
Pasco, Washington
First Name
Casey
Truck Year
1985
Truck Model
K2500
Engine Size
350 CI
My IL6 250 will do 70 on the freeway but it doesn't like it. Only when I need a haircut do I take it out to stretch it a little bit.
 

Camatruder

Full Access Member
Joined
May 11, 2016
Posts
290
Reaction score
1,047
Location
Belgium
First Name
Rik
Truck Year
1991
Truck Model
K5 Blazer
Engine Size
350ci / 5.7l
If yours is a '87, you should have the TH700R4. If your gears are the same as my '91, you'll be at 2250 RPM at 75 mph which is a very nice rpm for our squares. What you should check is the suspension and brakes.
 

BR@NDON

Full Access Member
Joined
Oct 23, 2012
Posts
99
Reaction score
11
Location
Texas
First Name
Brandon
Truck Year
1988
Truck Model
V10 Surburban Silverado
Engine Size
5.7 TBI
x2 on suspension and brakes

I've driven mine from Dallas to Los Angeles area and back at 75mph with no issues. The real test is when someone pulls in front of you and slams on their brakes..
 

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,411
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
Good quality 4 wheel disc brake system should take care of that.
 

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,411
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
Sure, but that's a lot of work and quite expensive :)
Well, I don't think it's that much work, but it can be a bit pricy alright, but I think peace of mind and safety makes it worthwhile, I know I'll be putting disc on the back of mine..
 

kdo58

Full Access Member
Joined
Sep 26, 2014
Posts
83
Reaction score
2
Location
Puyallup wa.
First Name
David
Truck Year
1975
Truck Model
k5
Engine Size
350
I drove my 75 k5 from Washington state to Florida and back with no issues.
 

Joey

Junior Member
Joined
Feb 6, 2017
Posts
1
Reaction score
0
Location
WI
First Name
joe
Truck Year
79
Truck Model
C30
Engine Size
5.7
What engine/Trans you running in that thing? I have a 79 c30 as well and the thing just screams down the freeway at 65, mines sbc/sm465
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,749
Reaction score
936
Location
North Texas
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
I'd say the main issues are the conditions of suspension, steering, brakes, and tires.

Can you hold the truck in a straight line down the center of your lane at 70 mph, and change lanes w/o any excitement?

Does hitting a dip or high spot at 70 mph cause the truck to lose its composure for more than 1-2 seconds?

Can you do an emergency stop from 70 mph without the truck pulling to one side?

Are the tires less than 8 years old, and do they have at least 3/32" tread left?
 

hirschdalechevy

Full Access Member
Joined
Mar 8, 2011
Posts
726
Reaction score
513
Location
norcal
First Name
rich
Truck Year
1977
Truck Model
k-30
Engine Size
454
Take my 77 blazer way out in the deep desert all the time , sometimes more than 300 miles and with 4.56 gears and 38's it loves 75mph. Drives like a dream , but it does have cross over steering. Even my wife loves to drive it.

I built my girl a 78 with 3.73's and 35's , 350 / 350hp roller motor , (gave it to her at 16) and we live 10 miles out of town , so it's on the hwy. daily at 70 +. no problem.

You must be registered for see images attach


You must be registered for see images attach
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,387
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
Take my 77 blazer way out in the deep desert all the time , sometimes more than 300 miles and with 4.56 gears and 38's it loves 75mph. Drives like a dream , but it does have cross over steering. Even my wife loves to drive it.

I built my girl a 78 with 3.73's and 35's , 350 / 350hp roller motor , (gave it to her at 16) and we live 10 miles out of town , so it's on the hwy. daily at 70 +. no problem.

You must be registered for see images attach


You must be registered for see images attach

These are really nice trucks, buddy.
 

vkh

Full Access Member
Joined
May 21, 2015
Posts
436
Reaction score
138
Location
Western Montana
First Name
Var
Truck Year
1981
Truck Model
C2500
Engine Size
454
I easily cruise at 80 for 200 miles at a time. I recently changed my gearing to 3.21 for some better mileage but it felt perfectly happy at 80 with the 3.73. Honestly I find mine a joy on the freeway, always fun to pass minivans. I have a 454 and th400 in my 81 c2500
 

Forum statistics

Threads
42,160
Posts
910,359
Members
33,658
Latest member
87POPS
Top