Seat swap to rears from a 2014-2018 Silverado...

[83Stepper]

Found an amazing deal on a 60/40 split rear bench out of a 2017 Silverado in the right color for $40, next to nothing, near me. Hard to say no when it's for less than filling up my 16 gallon tank lol. Currently have some buckets that the PO fab'd into the truck using some earlier 70's seat brackets and some heavy modification to them. Purchased a bench out of a 85 C30 that has some tears in the vinyl for $40, mainly for a temp bench until I could get something better. The cost to cover the current bench is more than I want to spend on this daily for now.

So I'll be documenting the process and figuring things out as I go along. Yeah there are others out there that have done it before, but I want to do this with a much more simplistic approach that just about anybody can do for next to nothing. Yeah the new split bench needs to be cleaned up, but that's part of the fun!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[EvilGenius]

As someone who has ridden on the factory bench seat and those same back seats in my daily, I think you'll be happier with the oem bench seat. Those back seats are cheap. Not much pad to them and they are thin.

I'm curious how you will end up liking them when you are done.

 

[Edelbrock]

As someone who has ridden on the factory bench seat and those same back seats in my daily, I think you'll be happier with the oem bench seat. Those back seats are cheap. Not much pad to them and they are thin.

I'm curious how you will end up liking them when you are done.

I have spend a fair amount of time in the back seat of my rig too, but to be honest - the comfort of the bench seat has always been the last thing on my mind. Never heard any complaints about it from the ladies either.

 

[Scott91370]

I look forward to this write up. Been eying them myself but after my first go around with a set of 2005-ish Ram 40/20/40 seats (and not having enough room to get away from the steering wheel) I've been a little gun shy trying another swap.

 

[83Stepper]

As someone who has ridden on the factory bench seat and those same back seats in my daily, I think you'll be happier with the oem bench seat. Those back seats are cheap. Not much pad to them and they are thin.

I'm curious how you will end up liking them when you are done.

Really just looking for something that'll get me by cheaply where my wife and teenager can come along for the ride and not get slid into each other during turns lol. Plus the PO moved the shifter from the column to the floor, so not sure how that'll interfere with the geometry of the original bench.

I look forward to this write up. Been eying them myself but after my first go around with a set of 2005-ish Ram 40/20/40 seats (and not having enough room to get away from the steering wheel) I've been a little gun shy trying another swap.

Same, I'm 6'4" and 240 and being a taller guy these trucks aren't the most roomy. Not planning on making a lot of modifications to it and I've always got the oem bench just in case.