chevy murf
Member
- Joined
- Aug 26, 2013
- Posts
- 39
- Reaction score
- 0
- Location
- Georgia
- First Name
- joseph
- Truck Year
- 1986
- Truck Model
- c10
- Engine Size
- v8
Well before I put in the new transmission I had the running lights and all no problem. I put in the new transmission cleaned up good and now the running lights don't work at all. On top of that the interior lights don't work either I know they are connected so I thought to check the fuses all of them are fine none were broke. The dash don't work at all also because I assume that they are connected to the running lights also. I thought it could be the switch BUT before the transmission swap when I opened the door the interior light would turn on. Now it does not at all so I don't think it is the switch at all because if it was I would assume the interior light would come on when I open the door with or without a working switch. So the only thing I think it might be is a ground wire I might of disconnected. Is there one main ground for the lights??? If so where is it located so I can follow it. Its for my 1986 k10 4x4 chevy 350. Thanks all