Replacing Rear Door Window Regulator and Rollers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,220
Reaction score
8,591
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
So I'm working on converting my dually from power window to crank window. Long story short, I was able to buy brand new regulators for the front doors but had to buy used for the rear doors. With that I'm looking to replace the nylon rollers. As you know, from the factory they are essentially riveted on so I'm going to have to drill the old rollers off.

Does anyone have any tips or tricks for putting the new rollers on? Most rollers I'm finding are not simply bolt on. They have a stud that comes from them. My only thought is to split that stud into quarters and then "spread it out" to attach it to the regulator arms. Thoughts?
 

Memaloose

Full Access Member
Joined
Dec 2, 2018
Posts
491
Reaction score
1,357
Location
Dolan Springs, AZ
First Name
Tony
Truck Year
1975
Truck Model
K20
Engine Size
350
I like your idea. I am having the same problem on my 72 Olds Toronado except I can't even find the correct nylon rollers and guides.
From what I've seen, a hydraulic press is the best way. Good luck!
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,220
Reaction score
8,591
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
I like your idea. I am having the same problem on my 72 Olds Toronado except I can't even find the correct nylon rollers and guides.
From what I've seen, a hydraulic press is the best way. Good luck!
Yeah, I've seen the hydraulic press route on the YouTube machine but I don't have one of them fancy units LOL That's why I thought about the splitting it into quarters so that I could spread it out without a press but looking for advice before I go down that route. :)
 

animal

Super Moderator
Staff member
Super Moderator
Joined
Jul 30, 2010
Posts
5,409
Reaction score
3,499
Location
Georgia
First Name
Lee
Truck Year
1986
Truck Model
c10 silverado
Engine Size
350ish
MMM Leave the power windows :shrug:
Glad I could help :wave:
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,220
Reaction score
8,591
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,220
Reaction score
8,591
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
In case anyone googles this in the future I thought I’d post the resolution because I could not find it anywhere on forums or YouTube when I asked the Google machine.

This is how to put the new regulator in. I ended up getting the old rollers working with a good dose of lithium grease and working it into the roller.

I posted a similar question on a squarebody group on Facebook and after throwing around some ideas I got her figured out.

See pic. Roller 1 I put in first. That bolt I have labeled “remove” you take out to give the window track more flexibility. Then roller 2 and 2B you work in from the right hand side of the tracks then button her back up again. It’s definitely and effort of patience but it worked!!

For anyone searching this on Google this applies to any 73-91 chevy/gmc crew cab or suburban when replacing or performing maintenance on the regulators for the REAR doors.


You must be registered for see images attach
 

Elliot W

Full Access Member
Joined
Apr 13, 2021
Posts
148
Reaction score
251
Location
CT
First Name
Elliot
Truck Year
1974
Truck Model
C10
Engine Size
5.3
Old77 I'm working on my front regulators...taking them out to replace the rollers. How did yours turn out? Did the split stud method work? Did you use a vice to press the rivet? Any other tips or tricks you have for this project? And does it matter which order I remove the bolts on the front door regulator?
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,220
Reaction score
8,591
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
Old77 I'm working on my front regulators...taking them out to replace the rollers. How did yours turn out? Did the split stud method work? Did you use a vice to press the rivet? Any other tips or tricks you have for this project? And does it matter which order I remove the bolts on the front door regulator?
I ended up not replacing the rollers as I didn't feel good about any of the methods and I didn't want to take a chance on ruining the regulators on those rear doors as they are hard time find. I ending up being liberal with penetrant and lubricant to loosen them up and moving freely. If you're replacing rollers for the front regulators you might try the same thing or just replace the regulators with brand new units. :shrug:
 

Latest posts

Forum statistics

Threads
41,857
Posts
903,629
Members
33,370
Latest member
mitchell1128
Top