Push through Center caps on Rally wheels

[chubble]

Does anyone know if/of a set of push through style center caps would work on a set of Rally Rims? I want to paint my rims gloss black but don't really like the look of the OE hubs anymore (plus missing 4x4 logos on 2) I thought gloss black wheels with a new set of polished trim rings and a smaller center cap might look pretty good on my truck.

 

[Swims350]

need to measure the hub hole size and then go over to summit and see what you can find.

 

[bucket]

The factory wheels are hub-centric, so there's no clearance at all for a push-through cap.

 

[Driver4r]

The factory wheels are hub-centric, so there's no clearance at all for a push-through cap.

Not even those el-cheapo chrome caps made of REALLY thin metal?

 

[bucket]

Not even those el-cheapo chrome caps made of REALLY thin metal?

Maybe if you hog out the center on the wheels. Aftermarket wheels usually have plenty of room though.

 

[BadDancer]

Bringing this old post back up. Would push through caps work on a 2 wheel drive? I'm hoping to run black 8" rallys and really want to do the push through bullet caps and bullet lugs. I've got a base model 84 1500 that's solid white with no trim and I think it'd look good.

 

[CalSgt]

Bringing this old post back up. Would push through caps work on a 2 wheel drive? I'm hoping to run black 8" rallys and really want to do the push through bullet caps and bullet lugs. I've got a base model 84 1500 that's solid white with no trim and I think it'd look good.

I'd gamble the 2wd are hub centric too

 

[Rustisbest]

Bringing this old post back up. Would push through caps work on a 2 wheel drive? I'm hoping to run black 8" rallys and really want to do the push through bullet caps and bullet lugs. I've got a base model 84 1500 that's solid white with no trim and I think it'd look good.

I've seen a couple trucks with these caps. Not my cup of tea but I Could understand the look they were going for

Speedway Bullet-Style Spider Cap Wheel Hub Covers, 5 on 5 Inch

www.speedwaymotors.com

 

[xm20k]

Almost any steel factory style wheel is going to be hub centric both 4 and 2 wheel drive and fit the hubs with just enough clearance they don't take any force to install/remove but no space to install any center cap that fits from the back side. Aftermarket wheels are a different story.

 

[BadDancer]

I've seen a couple trucks with these caps. Not my cup of tea but I Could understand the look they were going for

Speedway Bullet-Style Spider Cap Wheel Hub Covers, 5 on 5 Inch

www.speedwaymotors.com

Yeah, the spider caps are cool, but I prefer the look of the push throughs and bullet lugs so you get more contrast between the chrome pieces. I appreciate everyone's input here. I've been on the fence about what to do with my wheels since I bought my truck and I've gotta make that decision soon now that a bad ball joint has me needing tires...