Parking Brake Cable Guides-1978 K10

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

shep151

Junior Member
Joined
Oct 6, 2023
Posts
24
Reaction score
59
Location
Columbia River Gorge
First Name
Zach
Truck Year
1978
Truck Model
k10
Engine Size
350
I've been searching the forum for the answer, but I can't see it anywhere...

My Intermediate cable failed at the boat launch this week. Unfortunately, I was unaware that the cable guides were not solidly attached by design, so when I arrived home after a 100 mile drive, I have no left or right cable guides. The front right (inner, part 10 on LMC's diagram) cable guide made the ride, thank goodness, but I need to replace the outer guides.

LMC shows NO cable guides for pre-1981 K series trucks. So my question is, how different are the guides, really? And to get the closest match, should I buy 1978 2WD cable guides, or 1981 4WD cable guides? From the crappy design, I may end up making my own replacements this winter but I do need a quick fix, since I really don't like resting 10000 lbs on the tranny at the boat launch...

Thanks for any wisdom anyone has to share!
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
2,289
Reaction score
5,527
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
I thought for sure I had a good picture of the parking brake cable and brackets but Here’s the only picture I could find.

You must be registered for see images attach
 

73 cheySuper

Full Access Member
Joined
Sep 16, 2025
Posts
56
Reaction score
196
Location
beaverton
First Name
jerry
Truck Year
1973
Truck Model
cheyenne super C20
Engine Size
454
From that pic it appears the 4 wheelers have a shorter loop and a longer single pull to the pedal pulley.
 

Old Guy Bill

Supporting Member
Supporting Member
Joined
Sep 10, 2023
Posts
981
Reaction score
2,960
Location
KY
First Name
Bill
Truck Year
1978
Truck Model
K20
Engine Size
400
Here's my '78 K20 with a later NP208, which is longer than the original 203, and dual exhaust.
The rear ones are originals, both front are fabbed.
"Have Redneck Will Travel" :)
 

Attachments

  • IMG_8391.jpeg
    IMG_8391.jpeg
    130.3 KB · Views: 43
  • IMG_8392.jpeg
    IMG_8392.jpeg
    100.6 KB · Views: 44
  • IMG_8393.jpeg
    IMG_8393.jpeg
    118.4 KB · Views: 38
  • IMG_8394.jpeg
    IMG_8394.jpeg
    98.7 KB · Views: 39

hoagster

Supporting Member
Air Force Supporting Member
Joined
May 16, 2017
Posts
2,501
Reaction score
6,709
Location
California
First Name
Mike
Truck Year
1973, 2000
Truck Model
K10, 1500
Engine Size
5.3l
Here's my 73, hope it's helps you get it back together.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

straydog371

Supporting Member
Army Law Enforcement Supporting Member
Joined
Jun 6, 2023
Posts
119
Reaction score
337
Location
WNY
First Name
Kerry
Truck Year
1978
Truck Model
K10
Engine Size
350
Maybe what you're looking for?
 

Attachments

  • IMG_7111.jpg
    IMG_7111.jpg
    67.7 KB · Views: 42
  • Parking brake cable.jpg
    Parking brake cable.jpg
    195.1 KB · Views: 47

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,339
Latest member
wonone
Top