need some things

[jason81k20]

Alright fellas I need some things I'm having trouble finding at the pick n pull here
1.) 82 heater control thing. Just heat no a/c
2.) Tan or black seat belts
3.)crossmember braces for the one under the front of the bed
4.)82 wiper motor
That's all I can think of at the moment, easy stuff to ship. My zip is 15801 let me know what ya got an prices thanks

 

[marks86]

I have some of these things, prob is I don't have paypal

 

[jason81k20]

Why not?

 

[marks86]

never set it up, dunnno how

 

[HotRodPC]

As far as wiper motor, I'd just buy a new one. Common that these get aged and don't work well. Sometimes you can lube them a little and they work better, but if you get a used working one, chances are it won't work for long.

 

[MadOgre]

I have never seen a cross member under the front of the box. There is one that the rear of the cab mounts to and the next rearward one is the one that the front rear spring hanger attaches to

???

 

[jason81k20]

I have never seen a cross member under the front of the box. There is one that the rear of the cab mounts to and the next rearward one is the one that the front rear spring hanger attaches to

???

Yeah that's the one I'm talkin about, couldn't think of how to describe when I posted haha

 

[jason81k20]

As far as wiper motor, I'd just buy a new one. Common that these get aged and don't work well. Sometimes you can lube them a little and they work better, but if you get a used working one, chances are it won't work for long.

I don't have one at all haha, hmmm I'll look into what a new one costs

 

[MadOgre]

Yeah that's the one I'm talkin about, couldn't think of how to describe when I posted haha

Which one?

 

[jason81k20]

Which one?

The one at the front perches for the rear springs. My crossmember is good but the two braces rotted out so I need them, don't really wanna dick around making them

 

[MadOgre]

Oh the ones that catch the bottom of the frame and the back side of the spring hanger?

 

[jason81k20]

Oh the ones that catch the bottom of the frame and the back side of the spring hanger?

Yup that's the ones. The bolt to the cross member then go down to the frame/spring hanger

 

[MadOgre]

If you have access to a wrecker down there all you need is a one hand sledge and a Good sized cold chisel. Just pop the rivets. They are only grade 5 and usually takes only a couple really good wacks to pop them off.

Oh and a punch to punch the rivet out after you wack the head off.

 

[jason81k20]

I was gonna do that but haven't found one in the pick n pull with the bed off of it yet

 

[MadOgre]

They should be pretty accessible with the bed on